how to get over a case dent?

[jdaniel 125]

hello all

my custom built PC has a rosewill FBM-01 case which is really nice, unfortunately, it got dented.

on the top of the case, my USB speaker fell and caused a small dent on the top, my PC sits on a corner on top of my desk where my room light doesn't shine, but if you shine a bright light on the top of the case, you can see the visible small dent, but you cant feel it. i cant pop it out either, how can i just forget about the dent? its really annoying me..

EDIT: ive also considered putting some stuff on top of the case like a small stack of CD-ROM jewel cases

 

[thor220]

Put the top of the case flesh to a very flat surface and pound it flat with a hammer or mallet. Dent gone, problem solved.

 

[jdaniel 125]

Put the top of the case flesh to a very flat surface and pound it flat with a hammer or mallet. Dent gone, problem solved.

well i cant do that, the dent is very light. and inside of the case if i look at the top near the PSU, i cant even see the dent there.

 

[HogyBun]

Put the top of the case flesh to a very flat surface and pound it flat with a hammer or mallet. Dent gone, problem solved.

well i cant do that, the dent is very light. and inside of the case if i look at the top near the PSU, i cant even see the dent there.

If you're really worried about the dent. All you really need to do is find a sealant that cures rock hard. Apply a tiny bit of it onto the dent area, then grab a rubber squeegee and make it smooth. Now find your cases paint color and just paint over it. Problem solved. The dent will disappear.