I have been using a 4gb ram chip in my Asus P8P67 LE mb and earlier today acquired a 2gb chip and a pair of 4gb chips. I was hoping to run the pair of 4's with the 4 I was already using, but for some reason the slots on the 4gb pair don't line up even though they are also ddr3. I then tried to add the new 2gb chip to the original 4gb chip and use both chips for a total of 6gb, but can't seem to get that to work either. Individually, the 4gb chip only seems to work in the first slot (A1) and the 2gb chip only seems to work in the second slot (A2). As of yet my pc has not booted with both chips installed. Any suggestions would be appreciated. Thanks.
mb: asus P8P67 LE
cpu: intel i7-2600
ram: Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1600 (original)
Samsung 2GB DDR3 10600E (new)
Patriot Viper 3 8GB (2 x 4GB) DDR3 CL9 1600 (new)
mb: asus P8P67 LE
cpu: intel i7-2600
ram: Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1600 (original)
Samsung 2GB DDR3 10600E (new)
Patriot Viper 3 8GB (2 x 4GB) DDR3 CL9 1600 (new)
Last edited: