How to Lower the voltage in Uefi Bios asus

[johnny.wick02]

I've got this error when I bought new PSU. 1 or 2 week of using my pc is smooth. And then suddenly my pc just freeze and making static sound. I have no choice but to manual restart. And I got this error. CPU Over voltage. So i checked my bios and the indicator is red and my voltage is 2.3V. I checked online for solutions but they solving it with AI Tweaker tab. I don't have that tab. I just want to know how to lower my voltage manually.

 

[CountMike]

Without knowing which MB and CPU I don't think anybody can answer that but no modern CPU uses that much voltage, it's typically about 1.3v.

 

[johnny.wick02]

Without knowing which MB and CPU I don't think anybody can answer that but no modern CPU uses that much voltage, it's typically about 1.3v.

 

[johnny.wick02]

I'm sorry I couldn't gave complete info. I'm just newbie. My fault 🙁 I'm just confused right now.

Psu: Neutron ATX - 700w Grade A
Processor: Intel i5-4440
Memory: DDR3 8gb
Graphics: NVDIA Geforce GT640 4gb
MB: Asus H81M - E/M51AD/DP_MB

 

[CountMike]

All settings should be right here in the manual: https://www.asus.com/us/Motherboards/H81ME/HelpDesk_Manual/ Just look for CPU or Core voltage and set to about 1.3v but efore you do that, reset CMOS/BIOS to default. How to do it is in the manual too.

 

[CountMike]

why would you want to lower the vo0ltage of a non K cpu ? are your looking to slow it down ?

Because he says that it shows 2.3v and that's way beyond specs.

 

[The Paladin]

" So i checked my bios and the indicator is red and my voltage is 2.3V"
simple goto BIOS, reset to defaults. reboot and test.... and don't try to overclock you cpu will not permit it.

 

[faalin]

Neutron ATX - 700w a lot of reviews that i have read say they fail around the 10 month mark. Im wondering if its not starting to fail and spiking causing the board to shutdown.