How to recovery my 5 years work data on hard disk

[khaledhhh666]

I was instaling win8 and it need GPT partition .. So i went into command line and clear disk 0 accediently without doing partitions select .. And all data lost .. How can i recover them ..please help

 

[The Paladin]

once a partition id deleted , you need to get professional help to recover the data.
That said there are free software like RECURVA you could try to use, I suggest using another computer and setting the data drive as a usb drive to prevent writing on it as each time you write something to that drive it will destroy chances to recover data.

 

[khaledhhh666]

once a partition id deleted , you need to get professional help to recover the data.
That said there are free software like RECURVA you could try to use, I suggest using another computer and setting the data drive as a usb drive to prevent writing on it as each time you write something to that drive it will destroy chances to recover data.

Thanks man for your answer .. But now i didnot make anything after deleting all partition ... Is there any chance to get the data recover with the old partitions

 

[SkyNetRising]

What commands exactly did you use to "clear disk 0".
If you did that with diskpart clean, then recovery chances are quite good.
Diskpart clean only clears partition table info and drive signature. All data is still intact.

You can recover your data with getdataback for sure. This requires additional storage device, where to place recovered files.
https://www.runtime.org/data-recovery-products.htm

You may try Minitool partition wizard free. It has partition undelete function. It might return all your data even without extensive recovery procedures and additional storage.

 

[khaledhhh666]

What commands exactly did you use to "clear disk 0".
If you did that with diskpart clean, then recovery chances are quite good.
Diskpart clean only clears partition table info and drive signature. All data is still intact.

You can recover your data with getdataback for sure. This requires additional storage device, where to place recovered files.
https://www.runtime.org/data-recovery-products.htm

You may try Minitool partition wizard free. It has partition undelete function. It might return all your data even without extensive recovery procedures and additional storage.

 

[khaledhhh666]

Yes i done it with diskpart .... And now i have no windows in my labtop .. Some one says to me that you need to recover it befor instaling windows to prevent lossing data .. Is thats right or ? ... Thanks for help

 

[SkyNetRising]

What commands did you use? This is important.
How many drives are in your system?

 

[khaledhhh666]

What commands did you use? This is important.
How many drives are in your system?

 

[khaledhhh666]

At first the windows was unable to install .. So i pressed ( shift>F10 ) and type in command list ( diskpart) and selected disk 0 and made a clean .. After that i went to install and all disk was deletet

 

[SkyNetRising]

Diskpart clean cleans entire drive. If there were multiple partitions, then they all have been cleaned.
Selecting partition wouldn't have made any difference.

And yes - you can't install anything on that drive before recovery is done or you'll loose your data.

 

[khaledhhh666]

Diskpart clean cleans entire drive. If there were multiple partitions, then they all have been cleaned.
Selecting partition wouldn't have made any difference.

And yes - you can't install anything on that drive before recovery is done or you'll loose your data.

 

[khaledhhh666]

Thanks man i hope if any one can help me

 

[ss202sl]

Restore from backup? You should have made a backup before you started the install.
https://www.wikihow.com/Install-Windows-8

 

[SkyNetRising]

Thanks man i hope if any one can help me

Remove your current drive from pc and place in some safe place.
Get another drive and install windows and recovery software onto it.
Connect back your old drive and perform recovery.