Question How use (install) Logi Bolt to awake PC from Sleep using Logi Keys Mini?

[flycaster]

I have an HP TE01-1022, Logi Keys Mini, MX Master 3 mouse, Brothers printer, Logitech Options+. Everything is working fine via Windows 11 (latest update.) My present connection for the mouse and keyboard is through bluetooth. My only issue with this is that when I put the computer to sleep, either by letting it go to sleep via Settings, or using my sleep shortcut on the taskbar (C:\Windows\System32\rundll32.exe powrprof.dll,SetSuspendState 0,1,0, with Hibernate turned Off), the only way to wake the PC is by tapping the PC's start button. I have read that in order to wake the PC from sleep with the Logi Keys Mini keyboard, I need to connect the keyboard via the Logi Bolt. So I got the Bolt and plugged it into a USB port on the PC, but the PC still only wakes with the tapping of the start button. I need instructions on just how to properly install the Bolt. I admit that I don't know how to properly connect the Bolt to achieve awaking from sleep using the keyboard. BTW, the PC would awake when the MS Arc was being used; it was connected via a MS USB. Thanks.

 

[hotaru.hino]

I would try this solution first: https://www.tenforums.com/general-s...sleep-via-usb-keyboard-mouse.html#post1010036

Wake from USB devices may also be disabled in the UEFI settings, but I'm not familiar where to go to find that out on this computer.

 

[flycaster]

I would try this solution first: https://www.tenforums.com/general-s...sleep-via-usb-keyboard-mouse.html#post1010036

Wake from USB devices may also be disabled in the UEFI settings, but I'm not familiar where to go to find that out on this computer.

Thanks for the suggestion, but I really couldn't process the info. I need some kind of direct instruction specific to using the Bolt.

 

[flycaster]

Found out how to get the keyboard to wake PC. Here's an instructional video (https://www.google.com/search?clien...ate=ive&vld=cid:92394a73,vid:VibWlpryF0I,st:0) that shows how to do the connection via Logi Options. Actually, when I first tried to do the setup, I didn't quite follow the instructions. Once Options was put into searching mode, all one had to do is hold down a keyboard key long enough for Options to find the keyboard. I either wasn't sure what to hold down or I didn't hold down a key long enough.

And, now an added plus is that for those that use Options with Flow on two computers, it still works fine.