[SOLVED] HP Pavilion 570-P023W Case Dimensions

[crackisapro]

Hello, firstly I apologize if my English is bad.

I would like to do a sleeper and someone offered me a HP 570-P023W but I don’t have the case dimensions. I don’t know if the Power Supply will fit in and the graphics card too. And I don’t know if it will have a good air flow either.

I want to put an I7 9700K and an EVGA 1080 which measures 267 mm on a ATX motherboard.

If it doesn’t fit, can you offer me some sleeper cases with usb 3.0

Here’s a picture of the case:

Thank’s

 

[NightHawkRMX]

I would recommend an i7 8700k since it supports hyperthreading, giving the pc 12 threads, 4 more than the 9700k. The 8700 has 2 less cores but 4 more threads, making it a generally better cpu. If the stock motherboard is a full atx motherboard, the new motherboard and a reasonable cooler should fit. If the case is normal sized (mid or full tower) your gpu and psu should fit aswell.

 

[crackisapro]

Ok thank you. For the case I don’t know if it's ATX and if it's a Mid tower. That's what I want to know. For the cooling I thought about a 240mm watercooling if there’s enough place

 

[NightHawkRMX]

In an oem case you are lucky to fit a 120 mill rad.

 

[NightHawkRMX]

Judging by the size of the dvd drive in proportion to the rest of the pc, this is some smaller form factor pc, likely still using an atx motherboard. Fitting a gtx 1080 is going to be hard as you may need a narrow video card. If you want a case that has usb3, do you want it to still be sleaper, or would you want a window?

 

[crackisapro]

The window doesn’t matter, as long as it looks sleaper and everything fits in the case with enough place for a 240mm rad. If there’s a window it’s better but if not too bad