Hyper 212 evo x bracket screws won't fit on my motherboard

[Karam_]

My motherboard is a ms-7826 which is lga 1150. I just bought a hyper 212 evo cpu fan and the x bracket screws are too big for the motherboardelay. Please help asap.

 

[Herc08]

Do you have the bottom bracket underneath? What have you done so far? It should work with 1150 motherboards

 

[Dunlop0078]

It will work with an 1150 mobo's. I have installed them before. Read the directions. Or watch this video if you cant figure it out, its not hard: https://www.youtube.com/watch?v=n47WBQI31eE

 

[Karam_]

Thanks for replying so quickly.

The problem is that the screws on the x bracket fit my motherboard, but the second part that connect to the motherboard itself will not fit. The x bracket is not meant to screw onto the motherboard I don't think, probably just a coincidence. The second part that the x bracket screws into does not fit my motherboard. I would attach pictures but I don't know how to sorry

 

[Herc08]

Thanks for replying so quickly.

The problem is that the screws on the x bracket fit my motherboard, but the second part that connect to the motherboard itself will not fit. The x bracket is not meant to screw onto the motherboard I don't think, probably just a coincidence. The second part that the x bracket screws into does not fit my motherboard. I would attach pictures but I don't know how to sorry

If I remember correctly, the X-bracket should be springy, correct? You are suppose to have bolts on the motherboard for the X-bracket to sit on. This is where the bracket on the bottom of the board comes into the place.

Watch the video in the link from the other poster.

 

[Karam_]

I'm not sure how to reply sorry, but the person who just suggested me to go watch the video,

I put the bolts on but the bolts don't connect to the motherboard, the screws on them are too large

 

[Herc08]

uploading pictures would really help. using imgur.com or tinypic.com could help

 

[Karam_]

The screw to the left of the hole in the center of the picture is what I'm trying to get into the hole. It will not fit

 

[Herc08]

I'm sorry, I don't see a picture