Question I’m getting no graphics on my monitor from my new built pc. Ram Sticks aren’t lighting up. Not booting up.

[Jay1738]

here’s the list of my pc
-AMD Ryzen 5 7600
- GIGABYTE B650M D3HP
-GIGABYTE GEOFORCE 4060 RTX
- DDR5 32GB SILICON POWER RAM(16 each)
-SSD 1TB SP 3D NAND
-750WATT Power supply
I tried 1 ram at a time didn’t work. It’s not booting either, power supply should be enough for this build. Everything else works, fans, graphics card. Tried different monitors, made sure all the plugs are fully in, cleaned ram sticks. Not sure what to do now? HELPPP

 

[Aeacus]

750WATT Power supply

PSU make and model (or part number) is? Also, how old the PSU is, and was the PSU bought new or used/refurbished?

 

[Lutfij]

Welcome to the forums, newcomer!

750WATT Power supply
750W is the advertised watage of the unit, what is teh make and model of the unit? If the unit's recycled from a prior build, how old is the unit and what did it power prior?

Remove the discrete GPU from the system and see if the system powers on/POST's with the iGPU. How are you cooling the processor? Rams populating slots A2 and B2?

 

[Jay1738]

all parts brand new. I built this pc yesterday. GM750W Segotep & yes rams are in correct spot but I realize I got non rgb rams so what should I check next, im ahving trouble getting display on my monitor. Made sure my HDMI was fully in, tried all hdmi ports on both mobo and pc.

 

[COLGeek]

Remove GPU and only use integrated GPU. Make sure both the 8-pin and 24-pin power connectors are firmly attached to the motherboard and PSU.

Any change?

 

[Jay1738]

Remove GPU and only use integrated GPU. Make sure both the 8-pin and 24-pin power connectors are firmly attached to the motherboard and PSU.

Any change?

I think I found the problem, the RAM sticks don’t support/isnt compatible to the mother board. Seen reviews mentioning the same things . Can you help me confirm it ? I have a “

“ Silicon Power DDR5 32GB (2x16GB) Zenith 6000MT/s (PC5-48000) 288-pin CL30 1.35V UDIMM Desktop Memory Module RAM SP032GXLWU60AFDG White ”​

And my Mobo is

“. GIGABYTE B650M D3HP (AM5/ LGA 1718/ AMD/ B650/ Micro ATX/ 5-Year Warranty/ DDR5/ 2X PCIe 4.0 M.2/ PCIe 4.0/ USB 3.2 Gen2 Type-C/ 2.5GbE LAN/Motherboard). ”​

 

[Aeacus]

the RAM sticks don’t support/isnt compatible to the mother board.

All DDR5 UDIMM RAM sticks are compatible with your MoBo.

But what may not work, is the 6000 MT/s speed, your RAM is rated for. Since that speed is "OC".
MoBo specs: https://www.gigabyte.com/Motherboard/B650M-D3HP-rev-10/sp#sp

Still, when you can access BIOS, change the RAM frequency to 5200 MT/s (with timings of CL38-38-38-84) and system should boot fine.
Timings i listed are official ones for the 5200 MT/s speed,
RAM specs: https://www.silicon-power.com//web/product-Zenith_DDR5_Gaming_UDIMM

If no access to BIOS, clear CMOS and once you power the build on, do wait few mins, since MoBo needs to do memory training.
Also, try with 1 stick at a time.