[SOLVED] i cant fix my ram

[Davicci2310]

so when i was building my pc, i bought 2x16Gb DDR4 3200Mhz ram. and a while ago i noticed that, in task manager, it says the ram is runnign at 2133Mhz. so i tried turning on XMP but that doesnt work for some reason. anyone know of a way to fix this? MB: B450 Elite CPU: Ryzen 7 2700x.

 

[SkyNetRising]

Check your ram with CPU-Z.

Task Manager is known to show inaccurate readings.

 

[Davicci2310]

Check your ram with CPU-Z.

Task Manager is known to show inaccurate readings.

i did, DRAM Frequency is 1064, CL is 15

 

[SkyNetRising]

Can you show screenshots from CPU-Z - memory and SPD sections?

 

[Davicci2310]

Can you show screenshots from CPU-Z - memory and SPD sections?

https://imgur.com/a/qOO5WYv

https://imgur.com/a/pWFkcpT

 

[SkyNetRising]

Ram is operating in single channel mode.
Ram modules are installed in wrong slots.

Read user manual of your motherboard to find, how to activate dual channel mode.

 

[Davicci2310]

Ram is operating in single channel mode.
Ram modules are installed in wrong slots.

Read user manual of your motherboard to find, how to activate dual channel mode.

so i found and read the manual and they are now in the optimal spots. but i also saw that apparently for the b450 aorus pro, highest supported is apparently 2933 MHz, and it isnt on the qvl (i thought it was but i looked at the qvl for the elite version). should i clock the ram at 2933 MHz in BIOS?

 

[SkyNetRising]

should i clock the ram at 2933 MHz in BIOS?

Yes. Try it.

 

[Davicci2310]

Yes. Try it.

I did and it now clocks at 2933 MHz without any problems so far. Thank you!