[SOLVED] I cant get my RAM frequency over 2800 Mhz with 3200 MHz RAM

[Zelda_HIMself]

Hey,
I have an ASUS B450-F Mainboard with a Ryzen 7 2700x and 16 GB of Corsair Vengeance LPX for 3200MHz. My problem is that it won't run over a frequency over 2800 MHz. I've already enabled the D.O.C.P Overclocking with the settings as seen in my first picture below. When I set the frequency over 2800 MHz I get the following screen after a few failed booting attempts. I would love to get some help : )
Specs:
CPU - Ryzen 7 2700x
Graphics Card: Gigabyte GeForce GTX 1660 Super
RAM: Corsair Vengeance LPX 16GB 3200 Mhz C16
Mainboard: ASUS ROG Strix B450-F
Power Supply: Corsair TX650M

 

[Deleted member 14196]

Did you purchase them together as one kit or did you buy them individually?

 

[Zelda_HIMself]

I bought everything seperate. But the RAM as a kit.

 

[Deleted member 14196]

Post machine specs if you want others to help here

 

[Crosslhs82x2]

Don't know if this will help since you didn't list the exact ram kit model.

[SOLVED] - How Important is QVL?

I recently picked up a Ryzen 5 3600x and an Aorus Elite x570 WIFI to begin my upgrade. I found a set of RAM I'm looking at (Corsair Vengeance Pro RGB, 2x8 3200; CMW16GX4M2C3200C16), but that specific set is not listed on any QVL for that MOBO (I've looked at a couple, including Gigabyte's...

forums.tomshardware.com

This is the link from a Techpowerup thread
https://www.techpowerup.com/forums/threads/psa-corsair-lpx-and-amd.274300/#post-4386487

If you can return the ram and want a ram kit that runs Very Well on your mobo at it's rated speed as my friends does with a 3800x then look at this kit.
https://www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820232530

I have 2 different sets of these kits 1 currently running on a Asus rog ch7 with a 2600x.
And had the other kit on a Msi b450 pro carbon ac running a r5 3600.
The kit that was with the 3600 was on my Asus rog strix x470 f gaming that originally had the 2600x.
I had No issue's on any of the 3 systems running that kit at it's rated speed and is Samsung Bdie.

Have you tried manually entering timings and setting the frequency with a LITTLE voltage increase say by +.02v to 1.37v

Also there's no picture you mentioned.