I used a pci to sata expansion card but cannot see the drives in windows

[Lioric Lionheart]

This is the type of card I got

https://www.ebay.com/itm/Combo-PCI-Express-2-SATA-1-IDE-Ports-PCI-e-Controller-Card-Marvell-Chipset-/192294326310

I connected my optical drive to it
And when I on the pc I get a new bios window saying that my card has the optical drive attached to it

But when windows loads the device manager shows this card and no yellow triangles
But I cannot see the optical drive in windows

I have asus z97k motherboard
16gb gskill ram
M.2 card ssd ( which disable 2 of my sata ports. Which is why I'm using this expansion card)
4 sata hdd
Gtx 750 graphics card

So what do you think is happening?

 

[evongugg]

Change slot. It worked for me.

 

[alexoiu]

What PCIe slot using?

 

[rgd1101]

which pcie slot?
get the power cable to the optical drive? does it open and close when you click the button?

 

[Lioric Lionheart]

Ya of course I did plug the power to the optical drive otherwise at the bios I wouldn't see that the card has the optical drive
It's the smallest pci slot I think 1x

 

[rgd1101]

Ya of course I did plug the power to the optical drive otherwise at the bios I wouldn't see that the card has the optical drive
It's the smallest pci slot I think 1x

the optical drive should show up in device manager too. under view tab, check the "show hidden device"

 

[Lioric Lionheart]

Ya of course I did plug the power to the optical drive otherwise at the bios I wouldn't see that the card has the optical drive
It's the smallest pci slot I think 1x

the optical drive should show up in device manager too. under view tab, check the "show hidden device"

When I check under hidden devices tones of transparent devices are there but not connected

 

[evongugg]

Change slot. It worked for me.