I want to change the BIOS splash screen.

[poppadom]

I want to change it from showing PC specialist to showing Asus which is my motherboards manufacturer. My motherboard is an Asus sabertooth 990fx r2.0
Thanks

 

[Mr5oh]

On the few motherboards I've had that allowed this it was always an option in the BIOS, to use a custom flash screen or the default. When I changed it to something custom, I just followed the instructions from the manufacturers website.

I would pull up the manual for your motherboard, it should have specific instructions on how to do this.

 

[poppadom]

On the few motherboards I've had that allowed this it was always an option in the BIOS, to use a custom flash screen or the default. When I changed it to something custom, I just followed the instructions from the manufacturers website.

I would pull up the manual for your motherboard, it should have specific instructions on how to do this.

Ok thanks i will have a look for it then ill look at the manual

 

[i7Baby]

You can only do that if it has an alternate bios as shown on your motherboard webpage - http://www.asus.com/Motherboards/SABERTOOTH_990FXGEN3_R20/HelpDesk_Download/

which it does not.

 

[poppadom]

You can only do that if it has an alternate bios as shown on your motherboard webpage - http://www.asus.com/Motherboards/SABERTOOTH_990FXGEN3_R20/HelpDesk_Download/

which it does not.

Ok thanks anyway

 

[alexoiu]

I want to change it from showing PC specialist to showing Asus which is my motherboards manufacturer. My motherboard is an Asus sabertooth 990fx r2.0
Thanks

Can you post a picture of the Logo you'd like to change?
You can use MyLogo in AiSUite.
Take care that MyLogo2 supports 256-color images, 640x480 resolution.

 

[poppadom]

I want to change it from showing PC specialist to showing Asus which is my motherboards manufacturer. My motherboard is an Asus sabertooth 990fx r2.0
Thanks

Can you post a picture of the Logo you'd like to change?
You can use MyLogo in AiSUite.
Take care that MyLogo2 supports 256-color images, 640x480 resolution.

This is the picture

i didnt see the my logo in asus ai suite i will have a look again

 

[alexoiu]

It should be there.
Here's my logo on a P55 board:

 

[poppadom]

It should be there.
Here's my logo on a P55 board:

Haha i think i found it thanks and yours is amazing

 

[alexoiu]

Use Paint or similar for transforming the picture you'd like to use in a 256 bit 640x480 one, otherwise it would not work.
Then check https://www.youtube.com/watch?v=bWnFVvv_dzM or similar
http://www.asus.com/999/html/events/mb/mylogo.htm

 

[poppadom]

Use Paint or similar for transforming the picture you'd like to use in a 256 bit 640x480 one, otherwise it would not work.
Then check https://www.youtube.com/watch?v=bWnFVvv_dzM or similar
http://www.asus.com/999/html/events/mb/mylogo.htm

Ok, it asks me for a picture file and a BIOS file what is the BIOS file

 

[alexoiu]

Download the BIOS file from http://www.asus.com/Motherboards/SABERTOOTH_990FX_R20/HelpDesk_Download/
Either the version you're running or a newer one (not an older). Unzip it and save it on Desktop (for example), together with the picture.

 

[poppadom]

Download the BIOS file from http://www.asus.com/Motherboards/SABERTOOTH_990FX_R20/HelpDesk_Download/
Either the version you're running or a newer one (not an older). Unzip it and save it on Desktop (for example), together with the picture.

Thanks a lot i have already picked best answer, a bit too early. How do i find out my version of my BIOS

 

[alexoiu]

Check in BIOS or run CPU-Z.
http://rog.asus.com/wp-content/uploads/2011/08/EZ-screen.jpg
Where it says BIOS version

 

[poppadom]

Check in BIOS or run CPU-Z.
http://rog.asus.com/wp-content/uploads/2011/08/EZ-screen.jpg
Where it says BIOS version

Thanks i think i have got it now

 

[alexoiu]

Please post back if it worked and the new logo.

 

[Andy_14]

Hi Poppadom,

Did you get to sort this out?, I have the exact same issue as my splash screen is "PC Specialists" and I need it to be the default windows start up splash screen.

Any help on how you did it and the software used along with ant instructions would be great, that's if you got it solved.

Thanks

Andy

 

[alexoiu]

Hi Poppadom,

Did you get to sort this out?, I have the exact same issue as my splash screen is "PC Specialists" and I need it to be the default windows start up splash screen.

Any help on how you did it and the software used along with ant instructions would be great, that's if you got it solved.

Thanks

Andy

Until getting an answer, what board having?

 

[Andy_14]

Motherboard

Manufacturer CLEVO
Model W9x0LU (SOCKET 0)

 

[alexoiu]

It's a laptop?

 

[Andy_14]

It's a laptop?

Yes.

 

[alexoiu]

I can't recommend any safe method to change the splash screen for your laptop.

 

[Andy_14]

I can't recommend any safe method to change the splash screen for your laptop.

this is what it looks like, then boots straight into the desktop without any text or images.

http://

 

[alexoiu]

I suggest leaving it as it is instead of modding the BIOS and possibly bricking the laptop.

 

[poppadom]

Sorry for the late answer but it worked. I used the Asus ai suite to change the picture it was very simple, it's in one of the options.