i5-4690k @ 4.2GHz (STOCK vCore)

[EvooHD]

Hello i have big Q, i just OC my i5, with stock vCore. just setted

Ratio to 42
and enabled [Fixed Mode]

and run Prime95 for about 8minutes.
it passed all 2tests on all 4cores, but i stopped cuz my temps was going to HIGH almost 80c
first 5minutes it was Fine and temps stayed at 60c.. But then there was some test 8K and all my temps were going crazy, btw all the time my CPU was 100%. .

I have Be Quiet Pure Rock Cooler.

Does this mean that i passed the tests? and its save to run with 4.2 stock vCore?
or should i add ,because when i watched CPU-Z its showed that my vCore is automaticly at 1.152 vCore.

Thanks, i really want to start OC, and make my first OC atlleast 4.2GHz stable.


Edit: in my prime95 folder results.txt i found these

[Sat Feb 11 17:13:31 2017]
Self-test 448K passed!
Self-test 448K passed!
Self-test 448K passed!
Self-test 448K passed!

Edit2: Tested with IntelBurnTest.

 

[Makentox]

You should never overclock on auto voltage. Use manual first to find good frequency/voltage/temperature ratio.
This pretty much beginner friendly overclocking guide. https://www.youtube.com/watch?v=0CHs5_TdpXE

 

[EvooHD]

You should never overclock on auto voltage. Use manual first to find good frequency/voltage/temperature ratio.
This pretty much beginner friendly overclocking guide. https://www.youtube.com/watch?v=0CHs5_TdpXE

Can u give me anything to start? how much do i need vCore add? , my goal is to get 4.4 Thats my goal, but 4.2 is like where i want to start.

Can u help me achieve this please?

 

[Makentox]

You should never overclock on auto voltage. Use manual first to find good frequency/voltage/temperature ratio.
This pretty much beginner friendly overclocking guide. https://www.youtube.com/watch?v=0CHs5_TdpXE

Can u give me anything to start? how much do i need vCore add? , my goal is to get 4.4 Thats my goal, but 4.2 is like where i want to start.

Can u help me achieve this please?

I gave you the link. There are hundreds of guides all over the internet