Download Throttlestop, go through this walkthrough : https://www.ultrabookreview.com/31385-the-throttlestop-guide/
Make sure you select Speedshift since this is a Skylake. For whatever reason, it seems Speedstep is the default value on the old motherboards as I believe the Skylakes were the first Generation of Intels to do Speedshift (8-40 or 8 to whatever ration you are overclocking) instead of Speedstep (unselect speedstep).
My stock idle temps while Speedstep was on and speedshift off were about 33C, and now 29C. At 25% load used to be at 75C, now my 100% loads are at 75 after overclocking to 44 AND overvolting by 20mV.
Thank me later.
Make sure you select Speedshift since this is a Skylake. For whatever reason, it seems Speedstep is the default value on the old motherboards as I believe the Skylakes were the first Generation of Intels to do Speedshift (8-40 or 8 to whatever ration you are overclocking) instead of Speedstep (unselect speedstep).
My stock idle temps while Speedstep was on and speedshift off were about 33C, and now 29C. At 25% load used to be at 75C, now my 100% loads are at 75 after overclocking to 44 AND overvolting by 20mV.
Thank me later.