I7 7700K Voltage.

[mrycroft427]

Hi everyone

I have couple of questions i used the all in one OC profile in my bios asus 270f

It has managed 5ghz no problem, i'm just not sure about the voltage below is a screenshot not underload and below that one a shot when underload as it drops vdroop?, could you just confirm that its ok ive been using it for a few weeks all seems good to me never had any issues but told that it might be a bit high.

No load (no stressing)

http://prntscr.com/hhemyx


under load (stressing)

http://prntscr.com/hheoxx

Should i just leave it ? or try go about trying to drop some voltage.. which i'm a bit unsure about..

Thanks for your helps guys.

 

[bjornl]

You are overheating and thermaling your CPU. 100c is too high. I prefer to use aida64 for stress tests and use HWMonitor to watch stuff.
I would lower your voltage or lower your blck because you should not go over 90c, and ideally below 85c.

 

[mrycroft427]

Thats showing 100% load.. temps are like 70c. i think you were looking at tj max or either the 100% load.

 

[bjornl]

Sorry, I misread TJ max as the temp. I don't use this program as I prefer HWMonitor.
70c is certainly ok. Amazingly good even.

What were you using for stress testing? I prefer aida64.

 

[mrycroft427]

I was actually just using the stress test inside cpuid just because it was easier but i have stressed aida64 too and temps were about the same.

Just think my voltages look a bit high, but not sure if i should bother messing with it.

 

[bjornl]

I was actually just using the stress test inside cpuid just because it was easier but i have stressed aida64 too and temps were about the same.

Just think my voltages look a bit high, but not sure if i should bother messing with it.

If your temps are only 70c after stressing with AIda, I don't think you need to worry. Yes 1.4 is a little high, but clearly your cooling system and CPU are handling it well.

 

[mrycroft427]

Perhaps i should just leave it then =) thanks for your help.