i7 860 with ASUS P7P55-M no boot, no beep, nothing...

[hsdino]

Hi,

I have a ASUS P7P55-M with Core i3 530 since 3 years and all works fine.
I get a Core i7 860 for replacing my Core i3 but it doesn't work : no beep, no boot, just a black screen...

If i remove all memories (2x4GB DDR3 1333), the mainboard beep.
If i remove the ATI Radeon HD 5450, no beep.

I tested with all disk unplugged (HDD, Bluray, etc.) just with mainboard + cpu + memory + graphics card.

I tried with 1x4GB DDR3 1333 and 1x1GB DDR 1066, same...

Do you have a idea ?

Thank you

 

[jay_nar2012]

Did you update the bios?

 

[IRONBATMAN]

How many beeps did you hear when you removed the RAM ?

 

[hsdino]

Did you update the bios?

Yes, with the last one.

How many beeps did you hear when you removed the RAM ?

Beeeeeeeeeeeeeeeeeeeeeeeeeeeeep beep beep, Beeeeeeeeeeeeeeeeeeeeeeeeeeeeep beep beep, Beeeeeeeeeeeeeeeeeeeeeeeeeeeeep beep beep 😀

It's strange because this beep code indicate a video system error on AMI BIOS... however, without memory the video card could get some problem to works correctly 😀

 

[IRONBATMAN]

Did you connect all the required wires from the PSU to the motherboard and other devices ?

 

[hsdino]

Did you connect all the required wires from the PSU to the motherboard and other devices ?

20-pin et 4-pin connected only, it was required for the Core i3 too.
Others devices (HDD and bluray writer) has been disconnected for the test.

 

[IRONBATMAN]

This should help
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

 

[hsdino]

This should help
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

Sure ! I moved the memory on the A2 and B2 bank and... Houra !
Thank you for your help !