That PSU is fine, I would get a cheaper case to save money on that. Also, purchasing from multiple stores will save you a ton of money, even if you just get the speakers from Amazon, you save $35. You can also get cheaper RAM, like SR used in his build. If you live near a Micro Center, you can also get a 6300 for $109, or a 6300/M5A97 R2 LE combo for $165. http://www.microcenter.com/site/products/amd_bundles.aspx
The ASUS M5A97 LE is a bit of a dog for a performance enthusiast . Its narrower than an standard ATX board so it cramps space around the cpu , it lacks USB 3 front panel connectors and most importantly it has no heatsinks on the VRMs so overclocking is limited.
The only difference between the R2.0 and LE are the VRM heatsinks. It's a perfectly capable board, and is great for most applications except overclocking. Considering he doesn't have an aftermarket cooler, I don't think the VRM heatsinks will mean much if he decides to overclock.
The only difference between the R2.0 and LE are the VRM heatsinks. It's a perfectly capable board, and is great for most applications except overclocking. Considering he doesn't have an aftermarket cooler, I don't think the VRM heatsinks will mean much if he decides to overclock.
You are mostly incorrect .
The LE does not have heatsinks on the VRM's which will limit overclocking .
It has a 4 pin auxilliary power connector instead of the 8 pin EPS connector on the M5A97, meaning fewer power phases
It has no internal USB 3 headers .
It lacks a number of other on board features like memOK button
The LE R2.0 is back to standard width at least . That was completely confusing on the earlier model
It is NOT an M5A97 R2.0 with no heatsinks , it is a very inferior board for anyone looking to build a performance pc and/or hoping to overclock
The original Gigabyte selection has a far better feature set and even some overclocking potential