Question increase voltages maxwell 2.0 on latest drivers 2022?

[MaxTehLegend]

I'm trying to figure out if there's any way to increase voltages on the latest drivers on 980Ti's/Titan X GPU's without running into code 43 error's after tweaking the VBIOS. I've tried to figure this out for a while now as I'm locked to 1167mv on stock vbios. (Titan X). I've had a good look at maxwell 1.0 (GTX 970) vbios and confirmed that they do support voltage increases without any driver problems when tweaking them in vbios, but maxwell 2.0 (Titan X) doesn't have those voltage sliders in maxwell bios tweaker unlike the 970. does anyone have any insight to this?

the voltage sliders on maxwell bios tweaker 1.36:

https://imgur.com/ZPWY82X

View: https://imgur.com/ZPWY82X

 

[MaxTehLegend]

how do you either increase via msi afterburner/overclocking software or vbios mod more voltage to maxwell 2.0 (980Ti/Titan X) GPUs without getting 43 error on the latest drivers? I've managed to increase voltage successfully on a GTX 970 via bios tweaking due to the extra sliders, but on my Titan X those sliders are gone and can only increase voltage on P00/P01 state to desired voltage but will run into a code 43 error on any driver later than 372. does anyone have a workaround for this on maxwell 2.0?

the voltage sliders on maxwell bios tweaker 1.36:

https://imgur.com/ZPWY82X

View: https://imgur.com/ZPWY82X

 

[Lutfij]

Stick to one thread, please, unless you want the community to end up with spaghetti brains.

 

[MaxTehLegend]

Found a solution to this for anyone out there trying to accomplish the same thing. Open your VBIOS on Kepler BIOS tweaker and adjust these two sliders:

https://imgur.com/7e26Uzm

View: https://imgur.com/7e26Uzm

once saved, you can then move onto maxwell bios tweaker and should see those voltage tables appear

https://imgur.com/nU2AjXi

View: https://imgur.com/nU2AjXi