Install Samsung Evo970 m.2 NVME into Asrock Z370 Exreme 4

Status
Not open for further replies.
Jul 8, 2018
5
0
10
I have just bought a New Asrock z370 Extreme4, and I wanna know Briefly how I will gonna install The nvme m.2 Storage in the motherboard ?, is it a straightforward Job or I will struggle something ? also I cannot see on their website that they support NVME Storage I need someone to clarify for me
 
Solution
According to your motherboard manual:
Storage • 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
15), NCQ, AHCI and Hot Plug*
• 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support
NCQ, AHCI and Hot Plug
* M2_1, SATA3_0 and SATA3_1 share lanes. If either one of
them is in use, the others will be disabled.
* M2_2, SATA3_4 and SATA3_5 share lanes. If either one of
them is in use, the others will be disabled.

Those connectors SHOULD be labeled in the manual as well.


Yes, it's very straight forward and simple.
 
Jul 8, 2018
5
0
10


They Did not mention on the website they support the nvme storage would you mind checking that for me, please ?
 
Jul 8, 2018
5
0
10


Yes Exactly this answer what am I looking for,,, i wanna just understand This sentence ( probably at the expense of a one or two SATA ports for each utilized ) That's what am missing
 
Each m.2 slot you use disables a sata port. Your board should have 8 sata and 2 m.2. If you use the top m.2 it disables sata 0 and 1. If you use the bottom m.2 it disables sata 4 and 5. If you use both m.2 sata 0,1,4 and 5 are disabled. You get 6 drives max.
 
Jul 8, 2018
5
0
10


You are the best <3 thank you man you gave me comfort upon this :D <3 but how i will gonna know which sata will be disabled ,, Would you mind to search for me?
 
According to your motherboard manual:
Storage • 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
15), NCQ, AHCI and Hot Plug*
• 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support
NCQ, AHCI and Hot Plug
* M2_1, SATA3_0 and SATA3_1 share lanes. If either one of
them is in use, the others will be disabled.
* M2_2, SATA3_4 and SATA3_5 share lanes. If either one of
them is in use, the others will be disabled.

Those connectors SHOULD be labeled in the manual as well.
 
Solution
Status
Not open for further replies.