Question Installed new ram but when I boot I encounter a problem

[Jackletter98]

So, I had 2x8gb 3200mhz and decided to install two more 2x8gb 3200mhz. So, I put them in and then booted the pc but when I encountered a problem. I asked a friend of mine and he told me to go to the bios and disable xmp and when I did that the pc booted just fine. No errors. So, I decided to go back to Bios and enable xmp so I could have 3200mhz and that's when I got the problem again. So, I don't know what to do. Runs fine with 2133mhz but with 3200mhz I get an error after logging in.

Pc:
I5 9600k
Rog Strik z390-E gaming
32gb ram ddr4 3200mhz
Rtx 2070

 

[Ralston18]

This:

"I get an error after logging in."

What error?

PSU: make, model, wattage, age, condition?

This motherboard?

https://dlcdnets.asus.com/pub/ASUS/.../E14841_ROG_STRIX_Z390-E_GAMING_UM_V2_WEB.pdf

Double check installed RAM and configuration via physically numbered Pages 1-5 and 1-6.

Also visit the ASUS website for any applicable updates via the QVL (Qualified Vendors List).

 

[Jackletter98]

Psu:
CORSAIR RMx Series RM750x CP-9020179-NA 750 W ATX12V / EPS12V 80 PLUS GOLD Certified Full Modular Power Supply ( 2 years old )


What error? "Windows couldn't load correctly"

Yes, that is the motherboard. And made sure all ram sticks were same model.