Question Installing new Ram and SSD

[Kaydin910]

I am booting up an old computer. All it needs is RAM and storage so I got what I needed and am ready to put it together. I also already have a USB with windows 10 ready to go.

On the old PC, I had manually OC'd the ram because I could not enable DOCP. Do I need to wipe BIOS to undo the OC I did or will the new ram which is a different model be good to go.
This PC has Ryzen 2700x on an ASUS Prime x470 Pro using Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3000MHz C15 (CMK16GX4M2B3000C15) which is on the QVL so I should be able to enable DOCP this time without having to OC anything. Also the 2700x doesnt like 4 sticks of ram so im good there also.

Old Ram is Corsair Vengeance RGP Pro DDR4 3200MHz 4x8GB

 

[Kaydin910]

Went ahead and cleared CMOS and am installing the new components.
Need to get a new power cable and a cheap keyboard for it. Then Ill boot it up and see how it is.

 

[CountMike]

Went ahead and cleared CMOS and am installing the new components.
Need to get a new power cable and a cheap keyboard for it. Then Ill boot it up and see how it is.

You should be fine with 2x3000MHz just make sure sticks are in A2 and B2 slots.

 

[Kaydin910]

Yeah had some display issues. Left the CMOS battery out over night even after resetting.

Took GPU and Ram out, slept on it and came back in the morning and everything worked after I put it back together. Sometimes frustration is the main problem and you just need to refresh.

So this issue is Solved