I'm building a home server and I bought this motherboard: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157314
The board has a VGA, DVI and HDMI port, and I'm using the Pentium G620 chip with it.
The first time I booted the machine with my TV hooked up to the VGA port, it worked just as expected and I was able to go into the bios and look around. Ever since that first time, I have been unable to get anything to display with the integrated graphics. In fact I get 5 beeps when I start the system indicating "No VGA".
I went back to basics and unhooked all unecessary devices from the motherboard, but still get the beeps and no display. So next I decided to pull out an old PCI card, and it worked flawlessly. I proceeded to hook my other hardware back up, and all my drives and memory show up just fine. I even flashed an updated BIOS.
If I remove the PCI GPU I always get the 5 beeps for "no VGA". Is there some trick to this? I can't find any settings in the BIOS for it. I've tried clearing CMOS a few times with the jumper and by removing the battery.
Any help is appreciated.
Additionally, is the CPU clock ratio locked on my CPU? I don't seem to have the option to change it in BIOS, I was hoping to underclock to save a bit of power. Is this just a limitation of my motherboard?
The board has a VGA, DVI and HDMI port, and I'm using the Pentium G620 chip with it.
The first time I booted the machine with my TV hooked up to the VGA port, it worked just as expected and I was able to go into the bios and look around. Ever since that first time, I have been unable to get anything to display with the integrated graphics. In fact I get 5 beeps when I start the system indicating "No VGA".
I went back to basics and unhooked all unecessary devices from the motherboard, but still get the beeps and no display. So next I decided to pull out an old PCI card, and it worked flawlessly. I proceeded to hook my other hardware back up, and all my drives and memory show up just fine. I even flashed an updated BIOS.
If I remove the PCI GPU I always get the 5 beeps for "no VGA". Is there some trick to this? I can't find any settings in the BIOS for it. I've tried clearing CMOS a few times with the jumper and by removing the battery.
Any help is appreciated.
Additionally, is the CPU clock ratio locked on my CPU? I don't seem to have the option to change it in BIOS, I was hoping to underclock to save a bit of power. Is this just a limitation of my motherboard?