[SOLVED] Intel DH67CL not taking my compatible memory.

[EmployingBeef2]

I recently bought an Intel DH67CL on ebay. I assembled all of my components, and it gives the 3-beep error meaning a memory problem, and no post. I checked every last stick in my collection that has the 2Rx8 memory it supports, as well as the 1Rx8 which it wouldn't support, and it still gives me the error.

 

[kanewolf]

I recently bought an Intel DH67CL on ebay. I assembled all of my components, and it gives the 3-beep error meaning a memory problem, and no post. I checked every last stick in my collection that has the 2Rx8 memory it supports, as well as the 1Rx8 which it wouldn't support, and it still gives me the error.

Have you verified that you didn't bend any pins in the CPU socket ?

 

[EmployingBeef2]

Have you verified that you didn't bend any pins in the CPU socket ?

I have reseated the cpu, and I didn't see any bent pins when I reinstalled the cpu. I have also tried taking out and putting back in the CMOS battery as well, to no avail.

 

[GreyCatz]

1. How many RAM modules are you using?
2. How are the modules seated (X - X - X - X)?

You may have seen this document already, but here it is again:
https://www.intel.com/content/www/u...000006826/boards-and-kits/desktop-boards.html

Cheers,
GreyCatz.

 

[EmployingBeef2]

1. How many RAM modules are you using?
2. How are the modules seated (X - X - X - X)?

You may have seen this document already, but here it is again:
https://www.intel.com/content/www/u...000006826/boards-and-kits/desktop-boards.html

Cheers,
GreyCatz.

I actually haven't seen this document before. I had these (All from Micron):
2x 1G4M1
1x 1G6M1
1x 1G6E1

So by the looks of it, the ram I have is not at all compatible with the motherboard. Thank you!