I have built a PC with the following:
MSI MAG Z790 TOMOHAWK DDR 5 WIFI MOTHERBOARD
Intel I7 13700k CPU
2 X 16 GB DDR 5 RAM
ASUS GEFORCE RTX 470 GPU
700W PSU
Initially the computer would not boot with the RAM in A2 & B2 slots. I had to remove the RAM from the B2 slot and then Boot the computer and then update the BIOS. The PC then booted up both both RAMS fitted. Since then sometimes the computer will boot, other times it will not and I have to remove the RAM from the B2 slot to get it to boot.
I have only one 8 PIN CPU Power cable connected to the motherboard, Do I need to connect the 2nd CPU Power cable, could this be my problem or could it be that the 700W PSU is not powerful enough for this setup ?
Both RAMS work in the A2 slot and I have completely stripped and rebuilt the computer again and I cannot find anything wrong.
I
MSI MAG Z790 TOMOHAWK DDR 5 WIFI MOTHERBOARD
Intel I7 13700k CPU
2 X 16 GB DDR 5 RAM
ASUS GEFORCE RTX 470 GPU
700W PSU
Initially the computer would not boot with the RAM in A2 & B2 slots. I had to remove the RAM from the B2 slot and then Boot the computer and then update the BIOS. The PC then booted up both both RAMS fitted. Since then sometimes the computer will boot, other times it will not and I have to remove the RAM from the B2 slot to get it to boot.
I have only one 8 PIN CPU Power cable connected to the motherboard, Do I need to connect the 2nd CPU Power cable, could this be my problem or could it be that the 700W PSU is not powerful enough for this setup ?
Both RAMS work in the A2 slot and I have completely stripped and rebuilt the computer again and I cannot find anything wrong.
I