I got a Corsair CX600 600w power supply, but when I did the green+black wire test, I accidentally split the green wire pin on the ATX 24-pin. Will the power supply still work like this? Is there any way to fix?
Get yourself a pair of needle nosed pliers or something thin enough to get in on each side and give it a bit of a squeeze, all the connectors are split on top, that one just separated at bit. If you push it together so the top two bits touch it should work just fine. I think in its present state it would bind going into the main ATX connector on the board.
Get yourself a pair of needle nosed pliers or something thin enough to get in on each side and give it a bit of a squeeze, all the connectors are split on top, that one just separated at bit. If you push it together so the top two bits touch it should work just fine. I think in its present state it would bind going into the main ATX connector on the board.
If you look closely in the picture, you can see that one of the connectors are split
hunter315 :
Get yourself a pair of needle nosed pliers or something thin enough to get in on each side and give it a bit of a squeeze, all the connectors are split on top, that one just separated at bit. If you push it together so the top two bits touch it should work just fine. I think in its present state it would bind going into the main ATX connector on the board.