Is my graphics card overheating

[Pyree]

Now I am also stuck. Sorry.

May be move this to window 7 to find out what is causing the bsod first.

 

[Guest]

it's ok me to, ty for all your help

 

[RussK1]

I'm not much of a laptop guy but 79c would seem a bit high for laptop. Considering the lack of thermal solutions and that heat easily transfers to all the other components affecting them as well. Also got to note while cooling pads may seem good in theory sometimes in real world scenarios they aren't a good idea. You have to consider those fans are forcing air through the chassis which, negatively, forces more dust through as well... All this dust gets trapped in the fins of heatsinks thus affecting the cooling solution more so.

I'm not saying cooling pads are bad, just limit the airflow... Someone mentioned that not to take the machine apart if it's under warrantee and I'd have to agree. Call the manufacturer...

 

[Guest]

I don't think I could rightly answer your question but I do know that due to people R.M.A ing there cards(sending back to company after purchase) That alot of companies have been building their heatsinks for their graphics cards with alot of play between the gpu and the heatsink there by allowing the enduser to tighten the heatsink all they want and still not crunch the gpu. So I would take the heatsink off and do further inspection on the distance between the heatsink and gpu.
This can be done by cleaning off the thermal paste on top of the gpu applying new thermal paste to the gpu and placing the heatsink back on top of the gpu tighten down. Then remove the heatsink from the graphic card again and see if the thermal paste has squished itself against the entire gpu or if it is just the way that you put it on. No this just sqeezing out thermal paste onto the gpu is not that way it is done in practice, but what you want to do is see if the heatsink is approaching the gpu close enough to allow heat transfer via thermal paste.

 

[Pyree]

Don't do it if you still on warranty.

I think the stance of ASUS on laptop is you can open it up, you can change HDD and RAM because they are user serviceable component. But the GPU and CPU is off limit and has stickers on them.

At least that is what I see in mine.

And I did open it up to check for hardware (RAM seated properly and HDD connected) before returning it back for a repair. They still let me have the warranty since I didn't break any of the warranty void if removed sticker.

And I don't think there is a problem of over heating. 79 C on a laptop under load is normal and towards the cool side of normal.

 

[Guest]

Yeah i think i will send it back but want to try read these DMP files first to see if it tells me what it is. I got the wonderful BSOD again today and have been spending hours trying to read the, bluescreen viewer isnt opening them nor is visual studio, i have downloaded the debugging drivers and still nothing. Any ideas on a simple program to open them with?

 

[Pyree]

One last hope. Did you check that you have the ownership to the file?

 

[Guest]

How can i tell if i do?

 

[Pyree]

Right click>Properties>Security>Advanced>Owner

 

[Guest]

It says the owner is my screen name so guess thats a yes i have ownership.

 

[Pyree]

Yeah. Ok, now I am out of idea.

 

[Guest]

Thank you for trying, i'll keep on googling

 

[Guest]

I'm in!!!! I erm (looks sheepish) was using blueviewer wrong, now all i need to do is figure out what these drivers are lol it's all in jargen lol

 

[GreenDutchAlien]

Yeah !
Maybe you can write them down here, someone smarter than me can probably explain whats what.

 

[Guest]

2 are highlighted in red, one is CmBatt.sys and the other is dxgkrnl.sys no clue lol

 

[GreenDutchAlien]

Mmmm, the dx9krnl has something to do with the graphics i believe, probably the dx settings. like i said don't know much about that. Did you install dx11 ?
SOMEONE SMARTER PLEASE ?

 

[GreenDutchAlien]

Pyree, we need the little white rabbit over here !

 

[Guest]

Whats dx11? lol

 

[RussK1]

Whats dx11? lol

open start and type "dxdiag" enter... once loaded browse through the options for problem messages.

edit: when is the last time you updated your video drivers?

 

[RussK1]

here are the newest drivers for your card:

http://www.nvidia.com/object/notebook-win7-winvista-64bit-280.26-whql-driver.html

uninstall drivers and reboot and re-install new drivers

 

[Guest]

i tried to update through device manager 2 days ago said there was no new ones available then went to nvdia and put in my graphics card details and it said i was upto date

 

[Guest]

russ would it say error somewhere if there was a problem?

 

[Guest]

the dxdiag says no problems found

 

[RussK1]

russ would it say error somewhere if there was a problem?

CmBatt.sys is:
Control Method Battery Driver or Microsoft ACPI Control Method Battery Driver

Not necessarily, did you go through each page looking at the notes on the bottom?

As far as the video drivers? Who cares what windows says, never use drivers windows automatically installs for you as they're always dated. Uninstall the video drivers and re-install using the link I provided.

Have you checked your hard disk as well?

Open start, computer, right click C:, properties, tools, check now and reboot.

 

[Guest]

hahaha i'm having a thick day, i was in a notecard instead of the progam. It says its all good. As for check now will reboot soon as these 2 updates finish installing for framework as apparently they require a restart to.