[SOLVED] is my ram dead?

[cluelessboy]

Sorry I'm new to this.
I bought a ddr4 16gb(x2 8gb) ram 3200mhz I install it on my computer and it works normal until I tried to enable the xmp which has 3200mhz, I mistakenly changed the speed to 2666mhz while the profile indicated 3200mhz. Since then after booting it shut down and didn't boot again.

My explanation might be bad but pls bear with it since I'm not really good at English

 

[RARRAF]

look in motherboard manual for resetting bios then it should boot as normal

 

[cluelessboy]

look in motherboard manual for resetting bios then it should boot as normal

I will try it for now. Thanks for reply.

 

[cluelessboy]

look in motherboard manual for resetting bios then it should boot as normal

btw, when I used my old ram it boot normally. So does that mean that the new ram is actually dead or it might be solve with just bios reset? Sorry for that stupid question, I just don't know about it.

 

[RARRAF]

if it works with the old ram then go in the bios and change it to XMP shut down and put new ram 3200 back and it should be good.