Is sticker paper safe for power supply modding

[Danilo_7]

Happy new year!
Im going for a white theme build but my power supply aerocool rave 80+ white is red. I dont have a psu shroud to hide it and im going for a cheap alternative.

I have this thick sticker paper lying around so i was thinking about printing my design then stick it on my power supply. I just want to know if it is safe.
Edit:
In addition! I have this plastic sheet from a poster that is easily bendable. Can that be use psu shroud?

 

[chegalhavara]

It should be safe, yes. As long as it is plain paper, without alluminium foil and you dont cover any holes.

 

[jaslion]

Happy new year!
Im going for a white theme build but my power supply aerocool rave 80+ white is red. I dont have a psu shroud to hide it and im going for a cheap alternative.

I have this thick sticker paper lying around so i was thinking about printing my design then stick it on my power supply. I just want to know if it is safe.
Edit:
In addition! I have this plastic sheet from a poster that is easily bendable. Can that be use psu shroud?

The aerocool rave 80+ isn't a good psu so the smartest thing would be to replace it with a good unit.

Now to answer your question. I personally would not do paper close to open electronics. A plastic sheet would be safer.

 

[Danilo_7]

Happy new year!
Im going for a white theme build but my power supply aerocool rave 80+ white is red. I dont have a psu shroud to hide it and im going for a cheap alternative.

I have this thick sticker paper lying around so i was thinking about printing my design then stick it on my power supply. I just want to know if it is safe.
Edit:
In addition! I have this plastic sheet from a poster that is easily bendable. Can that be use psu shroud?

The aerocool rave 80+ isn't a good psu so the smartest thing would be to replace it with a good unit.

Now to answer your question. I personally would not do paper close to open electronics. A plastic sheet would be safer.

I dont have that much money for another psu. Im actually confused now idk if it acutally safe or not

 

[gdmaclew]

When in doubt, don't do it.
Save up your money for something like this..

http://www.corsair.com/en-us/rmx-white-series-rm850x-850-watt-80-plus-gold-certified-fully-modular-psu-na

 

[chegalhavara]

It is in theory safe. But paper burns. That is why jaslion said plastic sheet. In worst case scenario it just melts if the temps get dangerous. But none of them are conductive. So it should be safe.

But save some money for a decent psu when you can.

 

[Phillip Corcoran]

If you must use that Aerocool one, don't cover it with anything - - - it's already a mediocre brand at best without adding possible complications to it that could send it over the edge.

Replace when funds permit.

 

[Danilo_7]

Thanks guys so i wont do it, i bought the aerocool one because i was out of budget when i was building my other choice was deepcool so yeah aerocool is the one i pick.

I discovered my cheap old picture frame is using acrylic plastic. I just going to mod it to make a psu shroud