is there a good LGA 1155 Micro-ATX motherboard?

The Dude

Distinguished
Feb 23, 2014
64
0
18,640
hello guys
i want to replace my old OEM hp motherboard on my OEM desktop PC for compatibility issues, and the lack of USB 3.0, and i'm not looking for overclocking or Ultra 1080p gaming, as i'm only using a GTX 750 ti, and an i5 2300
so is there any good reliable boards out there? i'd like one with dual RAM channels, but it's okay if it's not, i have already found a Gigabyte GA-H61M-S2P at a good price, so are there any other choices available?
thanks in advance
 
Solution
It depends what your budget is really - There's loads of LGA 1155 boards on the market still, but they haven't depreciated much because they tend not to. The best I could immediately find was the GA-B75M-D3H (http://www.amazon.com/Gigabyte-Intel-Micro-Motherboards-GA-B75M-D3H/dp/B007R9CRGW) that is fairly reasonably priced for what it is - Comes with USB3, dual memory channels etc, but it depends if you can stretch to that or not.
Hello... How many Ram slots do you need and What price point? I had Three Gigabyte MB builds done recently and Have had no Quality issues... The boards I used where the Q77 chipsets, GA-Q77M-D2H... You get Four MEMORY Slots, High speed SATA channels, Full Rear set of Audio connectors, USB3.0, and INTEL LAN.
 
It depends what your budget is really - There's loads of LGA 1155 boards on the market still, but they haven't depreciated much because they tend not to. The best I could immediately find was the GA-B75M-D3H (http://www.amazon.com/Gigabyte-Intel-Micro-Motherboards-GA-B75M-D3H/dp/B007R9CRGW) that is fairly reasonably priced for what it is - Comes with USB3, dual memory channels etc, but it depends if you can stretch to that or not.
 
Solution


You'd be surprised. A lot of the 1155 boards that remain on the market are at the lower end; the ones that were made in bulk for OEMs, and have just been sitting on shelves since then. And most of those only come with two DIMM slots. It's the same problem I have with my Core2Quad machine - It was cheap when I built it and while I can find an old LGA775 board with more, it's not worth spending the money on getting more memory space now because the socket is obsolete, so spending anything for a very short term gain is a waste of money.
 

OP asked for dual channels; not for two DIMMs per channel. Micro-ATX boards with only two DIMM slots are still dual-channel: one DIMM per channel.