[SOLVED] Is there a way to save XMP profiles and not boot into bios every time I restart the power supply?

[Andyneedsfood]

Hi, I was wondering if there was a way for me to save my XMP profile in order to not enter into BIOS every time I restart my PC. Whenever I boot my PC, it would always go to BIOS before windows and over the years it has become an annoyance to me therefore I am asking here if there is any way to aleviate this issue.

IDK if this is useful but I also always turn my pc off then turn my power supply off manually (VIA the switch on the back) as the lights on GPU will stay on without turning off the power supply and this disturbs my sleep haha

Usefull specs -
Motherboard: Asus Prime Z270-A
RAM: Corsair 16gb 3000mhz
CPU: Intel Core i7 7700k overclocked to 4.7ghz

 

[rolli59]

The motherboard battery is most likely gone because it is there to keep BIOS settings. Replace it and BIOS settings should stay.

 

[Andyneedsfood]

The motherboard battery is most likely gone because it is there to keep BIOS settings. Replace it and BIOS settings should stay.

Thanks a lot I will try this out

 

[drea.drechsler]

Also look through your BIOS for a section for saving Profiles, it may be called Overclocking Profiles or Settings Profiles. Then save a profile and restore it every time you shut down the PSU.

But the best thing is get a new battery.