Is this a good pc tool kit for assembling pc's?

[Th3DerpyC0w]

The link is https://www.pccasegear.com/products/12014/102-piece-computer-tool-kit/ , if you have any better suggestions I would like to hear them, but I would them prefer to be from an Australian store.
Thanks.

 

[Isokolon]

doesn't seem very necessary. when I assembled my pc all I needed was a screwdriver.
maybe an anti-static

 

[sovereignturf]

It's a bit overdrive just for building a pc, but it looks like it has lots of tools you could use for handyworks around the house. If you don't have tools then go for it.

 

[Th3DerpyC0w]

doesn't seem very necessary. when I assembled my pc all I needed was a screwdriver.
maybe an anti-static

It's a bit overdrive just for building a pc, but it looks like it has lots of tools you could use for handyworks around the house. If you don't have tools then go for it.

Yeah, all I have is a screwdriver and it is quite long and hard to get into tight spaces.

 

[R_1]

to assemble a computer all you need is a screwdriver, a pair of pliers (not always needed), and a brain (always needed).

really all you need is one of these
https://www.amazon.com/Swiss-Tech-ST50022-Multitool-Screwdrivers/dp/B0001EFSUC?psc=1&SubscriptionId=AKIAILSHYYTFIVPWUY6Q&tag=duckduckgo-ffsb-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B0001EFSUC
not an endorsement example only
screw drivers and pliers for standoffs, only two tools I have ever really needed building pc's

 

[Andy_K]

The Torx bits are useful especially for non standard cases like HP or Dell machines,
but for building custom machines from scratch, you would be fine with a couple of decent screwdrivers and a pair of cutters - if you intend to use cable ties

 

[Th3DerpyC0w]

The Torx bits are useful especially for non standard cases like HP or Dell machines,
but for building custom machines from scratch, you would be fine with a couple of decent screwdrivers and a pair of cutters - if you intend to use cable ties

I would also sometimes use it for laptops.

 

[Andy_K]

The Torx bits are useful especially for non standard cases like HP or Dell machines,
but for building custom machines from scratch, you would be fine with a couple of decent screwdrivers and a pair of cutters - if you intend to use cable ties

I would also sometimes use it for laptops.

Well laptops have all kinds of screw types and sizes, so this kit would be very useful on that front - especially the mirco screwdrivers.