I recently extracted 2 LED strips from an old case from the front panel. The motherboard had slots for "Jled 1" and Jled 2". The new motherboard I bought does not have these ports. The strip and cable aren't the standard molex 4 pin, instead there are 5 holes for the old boards "JLed" slots.
My goal is to use these strips in my new case, if only I could figure out where to plug them in, or how to rewire them.
Motherboard: Z170MX-Gaming 5
Case: ECLIPSE P400S
Here's a picture of the LED strip:
http://imgur.com/a/QiByH
My goal is to use these strips in my new case, if only I could figure out where to plug them in, or how to rewire them.
Motherboard: Z170MX-Gaming 5
Case: ECLIPSE P400S
Here's a picture of the LED strip:
http://imgur.com/a/QiByH