When I put the PSU switch in on(1) position some lights turn on but not all and no fans.
There is a fade in/out multi-color light coming from the mother bord.
The status Q-LEDs are all unlit
The NVIDIA graphcs card status lights are on.
There are no statud LEDs on the front panel
Pressing the soft power button and/or reset buttons have no effect.
The only difficulty assembling the board was installing the AMD chip with the cam over center cooling fan. Each time I tried to install the fan, it shifted the chip around and took many tries to get in place and locked down. Visual inspection of the pins shows one pin very slightly bent, but there was no resistance putting it in the socket.
I was also confused about the orientation of the power on and reset connectors. The manual seems to indicate they go on horizontally, but it could be interpretted as going on vertically. The hot and ground pins are oriented so it looks like it probably doesn't matter.
Any suggestions?
There is a fade in/out multi-color light coming from the mother bord.
The status Q-LEDs are all unlit
The NVIDIA graphcs card status lights are on.
There are no statud LEDs on the front panel
Pressing the soft power button and/or reset buttons have no effect.
The only difficulty assembling the board was installing the AMD chip with the cam over center cooling fan. Each time I tried to install the fan, it shifted the chip around and took many tries to get in place and locked down. Visual inspection of the pins shows one pin very slightly bent, but there was no resistance putting it in the socket.
I was also confused about the orientation of the power on and reset connectors. The manual seems to indicate they go on horizontally, but it could be interpretted as going on vertically. The hot and ground pins are oriented so it looks like it probably doesn't matter.
Any suggestions?