Keep getting BSOD on start up

[GEE93]

I built a PC recently and almost every time I start it up I am faced with a BSOD or another error. Here are the errors I have seen so far:

Critical Process Died
IRQL_NOT_LESS_OR_EQUAL
PAGE_FAULT_IN_NONPAGED_AREA

I have browsed the internet and haven't been able to find a solution even after contacting Microsoft technical support. Any help would be great.
Thanks in advance

 

[wpgwpg]

The IRQL_NOT_LESS_OR_EQUAL error is caused by a driver problem. For starters I'd look at Device Manager to see if anything there has ! or ? to the left of an entry for something. That means you need a different driver. Be sure to get your drivers from your hardware manufacturer's site only.

Good luck.

 

[GEE93]

The IRQL_NOT_LESS_OR_EQUAL error is caused by a driver problem. For starters I'd look at Device Manager to see if anything there has ! or ? to the left of an entry for something. That means you need a different driver. Be sure to get your drivers from your hardware manufacturer's site only.

Good luck.

After taking a look at my device manager I could see that the driver for my water cooler Corsair H115i is not installed, could that be the issue? I've tried to find it online but was unable too.

Thanks for the initial response btw

 

[Colif]

bottom post here shows how he got drivers installed, seems its to do with .net. Thread also mentions a driver package you may need.

http://forum.corsair.com/v3/showthread.php?t=158189

 

[GEE93]

Today I started up my PC and received a new message which I had never received before about windows registry files being corrupt. How can I go about fixing this?

 

[LukeFatwalker]

Today I started up my PC and received a new message which I had never received before about windows registry files being corrupt. How can I go about fixing this?

I would try running Startup Repair. That should be able to repair the corrupted registries.

 

[GEE93]

Today I started up my PC and received a new message which I had never received before about windows registry files being corrupt. How can I go about fixing this?

I would try running Startup Repair. That should be able to repair the corrupted registries.

That was the first thing I did however, it says that there was nothing to repair. After trying that I opened CMD Prompt and ran sfc /scannow which stated there was corrupt files so I then ran Dism /online /cleanup-image /restorehealth this still did not solve the issue :S

This is what CMD Prompt output:
http://imgur.com/BYTDZDV

 

[wpgwpg]

It sounds like you're going to have to save your data and reset to factory settings unless you've made a full system backup to an external hard drive like I do.

Good luck.

 

[GEE93]

It sounds like you're going to have to save your data and reset to factory settings unless you've made a full system backup to an external hard drive like I do.

Good luck.

Can I just format the SSD which windows is installed on and leave my HDD with programs on?

 

[GEE93]

It sounds like you're going to have to save your data and reset to factory settings unless you've made a full system backup to an external hard drive like I do.

Good luck.

So I followed your advice and formatted my SSD and did a clean install of Windows. I ran sfc /scannow and everything was clear. I then installed drivers and a few other programs like teamspeak, steam (already on my HDD storage device) ran sfc /scannow and it said corrupt files were found... Are there any logs I can provide to help troubleshoot the issue?

Thanks all for the help so far

 

[Colif]

Because dism found corrupt files the first time, it is likely the image you used to reinstall windows 10 was the reason this one is corrupt again. You should do a full clean install with a new USB image

 

[GEE93]

Because dism found corrupt files the first time, it is likely the image you used to reinstall windows 10 was the reason this one is corrupt again. You should do a full clean install with a new USB image

Okay I will give that a try but since the corrupt files only occurred once I installed programs could it not be a program causing the files to corrupt?

 

[Colif]

it could be the drivers i guess, you can run driver verifier on them and see: http://www.tenforums.com/tutorials/5470-driver-verifier-enable-disable-windows-10-a.html. Would be a good idea before you fresh installed to find cause. save you repeating it.

 

[GEE93]

Are there not any log files I can provide that will display the issue? Would make more sense than trying possible fixes that may not even work.

 

[Colif]

why yes, there are... I don't know why I hadn't suggested that yet... scratches head. I can't read the logs bet there are those that can. I intend to figure them out in future, I just don't have the time right now.

Download and run this: http://www.resplendence.com/whocrashed
it will look at your logs and possibly tell us what caused error

Copy/paste its result screen in here.


For a more detailed analysis, can you follow option one of this link: http://www.tenforums.com/tutorials/5560-bsod-minidump-configure-create-windows-10-a.html
and then underneath choose Have Windows Create a Small Memory Dump (Minidump) on BSOD
Now it will create a file in c/windows/minidump
copy that file to your documents folder, and then upload the copy to a cloud server and share a link here.
You can't upload the original dump file as it will say access denied.

 

[GEE93]

why yes, there are... I don't know why I hadn't suggested that yet... scratches head. I can't read the logs bet there are those that can. I intend to figure them out in future, I just don't have the time right now.

Download and run this: http://www.resplendence.com/whocrashed
it will look at your logs and possibly tell us what caused error

Copy/paste its result screen in here.


For a more detailed analysis, can you follow option one of this link: http://www.tenforums.com/tutorials/5560-bsod-minidump-configure-create-windows-10-a.html
and then underneath choose Have Windows Create a Small Memory Dump (Minidump) on BSOD
Now it will create a file in c/windows/minidump
copy that file to your documents folder, and then upload the copy to a cloud server and share a link here.
You can't upload the original dump file as it will say access denied.

So I followed what you said and here are the results:
http://imgur.com/Xya37gS