Konica Minolta C35 imaging unit issue

[indyitguy]

I have a Konica Minolta C35 printer that will not recognize the imaging units. We use the chip trick on this printer to get more life out of the imaging units. I've swapped IUs from another C35 we have and it still comes up as IU END. I know the chips are good so the only other thing I can think it could be is the sensors the chips touch when the IU is installed. Has anyone ever replaced this part before? Any other solutions that can get this printer back up and running?

 

[Lutfij]

Best place to look for your chip would be here.
+
Further reading.

 

[indyitguy]

Thanks Lutfij but I don't need the chips, I have plenty of them. I was hoping to find someone that has replaced the sensors those chips connect up to. I have a good printer that's the same model so I'm going to swap parts out and make sure the issue is with those sensors before ordering one.