Question LED strip female molex? how to connect for Phanteks Enthoo Primo SE

[rocafella1978]

hi all, this is the case that i have http://www.phanteks.com/Enthoo-Primo-SE.html
there is a wire, with a female molex connector for the LED strip inside the case going from back to front, but i have no idea how and where to connect it to? since the PSU and any PSU's i have looked at, only come with connectors also female molex.
so how and where do i get male molex? and how to power that LED strip / and to connect to that?
https://postimg.cc/gallery/3Y25X6W

what do i need? or am i missing a cable? any help is appreciated.

 

[JohnBonhamsGhost]

double check your PSU cables, many of them will be designed for daisy-chaining so they may actually be both male & female.

 

[rocafella1978]

hi John, thank you, i tried and checked all my cables for the PSU EVGA 850 GT, but also checked Asus PSU and a Seasonic PSU, but none have MALE MOLEX, all come only with female molex, any suggestions and or recommendations? thank you so much for all your help.

do you think i can use this cable, somehow?

https://imgur.com/npjn25v

View: https://imgur.com/npjn25v