Liquid cooling pump working? maybe its just the LEDs?

[pjgowtham]

This is my build :
CPU : AMD Ryzen 1700X
MOTHERBOARD : Asus prime x370 pro
GPU : MSI RX 480 8GB ( Yet to be installed on my build )
PSU : EVGA supernova 850 P2 fully modular
SSD : Mydigital SSD BPX 80mm NVME Pcie
HDD : WD blue 1TB internal hard drive 7200RPM
Memory : Corsair vengeance 8gbx2 DDR4 3200Mhz C16
Cooling : Liquid cooling swiftech h240 x2
Keyboard : Logitech g910 gaming keyboard
Mouse : Logitech g502 proteus spectrum
Extended mouse mat : Redgear MP80 control type mat
Monitor : Samsung curved LED 24 inches LC24F390FHWXXL
AmazonBasics HDMI cable
UPS : APC BX600C-IN 600VA
Casing : NZXT H440

I know i cant get it to a display without a GPU. Its shipping from hongkong and its gonna take more than 10 days i guess
It took me long time to get my hands on a motherboard AM4 x370

I thought ill start building with the components i have and that i could install my GPU when it reaches me after 10 days

I built everthing except the GPU. No point connecting to a display now. But yeah i tried and it didnt work . Motherboard LED starts glowing. I switch it on, all fans work, the liquid cooling dye dispersed well during the first boot from the reservoir but the liquid cooling LED doesnt seem to work??!!

Is the Swiftech h240 X2 working well or faulty?
I dont even know if its working ( The dye dispersed on the first boot though...)
I feel its supposed to work the moment i push the power button? or is it just a bios setting which needs to be changed?

 

[mcnumpty23]

did you use the fan hub it comes with?

got a little button on it

think you can turn off/on/change the led colours with it

 

[pjgowtham]

Yes, i used that CH1 fan hub it came with.. tapped the LED button multiple times, nothing worked though. I ve connected the fans to that fan hub and those fans work flawlessly. The SATA power to the pump is intact and i did follow the installation guide for connecting onto the fan hub

 

[pjgowtham]

Update :
Now the heatsink LED seems to be working well with the CH1 Fan + LED hub ( i thought ill interchange the LED connectors and see)
I tried connecting the pump LED to the RGB header to check if it fires up and it did
The RGB header syncs with the asus Aura Sync and that pump was going crazy
I did hear some electric noise though. So i shut it down.

 

[mcnumpty23]

it has separate led connector for the block and the reservoir?

havent had my hands on the new swiftechs jusst the older ones

but the new one sure does look nice probably the best looking AIO in my opinion

well if all the leds light up lol

 

[pjgowtham]

The pump is working fine now. i checked
The reservoir Lights and the LED strip over the reservoir is faulty ( Still works when connected to the RGB header) ?!?!
The block LED is malfunctioning ( Block has got 2 led s and they are glowing in different colours )
LED s are a pain in the wrong place.