[SOLVED] looking for a cheap lga 1155 ddr3 1600 motherboard

[LucasPerks]

im currently using a dell motherboard and a dell optiplex 3010 case, i want to buy a new case with a glass side panel, but since i have a dell motherboard it wont fit in there, hence why i need a motherboard. upon researching for a new motherboard, i have found that they can cost up to $500 aud, which is no where near my budget. if anyone could find me a $100 aud ($70 usd) motherboard, that would be amazing.
for any more info on my pc, feel free to ask. thanks in advance
specs:
cpu: intel core i5-3470
gpu: msi gtx 1650 super ventus
ram: x2 800mhz dual channel
ssd: 500gb samsung 870 evo
hdd: 1tb wd 7200rpm

 

[Lutfij]

Make and model of the case that you're looking at? Do you need an atx case or an matx case? The chipsets open to your processor are: H61(they will need a BIOS update so they can accept a 3rd Gen Intel processor, socket is still LGA1155), B75 and H77.

I reached this shortlist:
https://www.ebay.com.au/sch/i.html?...id=15&_sop=15&_osacat=0&_odkw=H75+motherboard

but I don't know the form factor you're requiring in accordance with the chassis(you intend to buy).

 

[LucasPerks]

Make and model of the case that you're looking at? Do you need an atx case or an matx case? The chipsets open to your processor are: H61(they will need a BIOS update so they can accept a 3rd Gen Intel processor, socket is still LGA1155), B75 and H77.

I reached this shortlist:
https://www.ebay.com.au/sch/i.html?...id=15&_sop=15&_osacat=0&_odkw=H75+motherboard

but I don't know the form factor you're requiring in accordance with the chassis(you intend to buy).

id prefer an matx as when i get the case, it will be smaller. and how would i update the bios with the 3rd gen intel cpu? will it still post. what info would you need for the chassis?

 

[LucasPerks]

pretty much exactly whats in the title, will the Gigabyte H67A-UD3H work with the intel core i5 3470? gigabyte says it only supports 2nd gen processors, but could i do a manual bios update and resolve that problem? thanks in advance

 

[Lutfij]

Nope, regardless of rev 1.0 or 1.1.

A link to the chassis you're looking at or have at hand would always help the community for followup suggestions.