Question Looking for a source for motherboard fish paper

[dev_cyberpunk]

Does anyone know where I can get fish paper for an eatx or extended Flex ATX (9x12) motherboards?

 

[Lutfij]

motherboard fish paper
You mean this;
https://jzelec.en.made-in-china.com...ion-Paper-6520-Polyester-Film-Fish-Paper.html
?

 

[USAFRet]

Does anyone know where I can get fish paper for an eatx or extended Flex ATX (9x12) motherboards?

A simple google search for "fish paper" shows many results.
Amazon, McMaster-Carr, etc...

 

[COLGeek]

This stuff?

https://www.grainger.com/product/Gasket-Sheet-12-in-x-12-in-810L79?gQT=1

https://www.amazon.com/GC-ELECTRONI...lpcontext&ref_=fplfs&psc=1&smid=ACTAOCRPF0N2J

Also, why?

 

[dev_cyberpunk]

Also, why?

Because I'm in the process of building a computer in a rack mount case and the standoffs are 1/2 the height of the standard standoffs.

 

[USAFRet]

Because I'm in the process of building a computer in a rack mount case and the standoffs are 1/2 the height of the standard standoffs.

You can buy a box of several hundred standoffs, of varying sizes.
$15 and under.

https://www.amazon.com/Csdtylh-Male-Female-Standoff-Stainless-Assortment/dp/B06Y5TJXY1

https://www.amazon.com/Standoffs-Motherboard-Assortment-Threaded-Circuit/dp/B0CBPGKDP4

 

[dev_cyberpunk]

motherboard fish paper
You mean this;
https://jzelec.en.made-in-china.com...ion-Paper-6520-Polyester-Film-Fish-Paper.html
?

yes, but I was wondering if anyone has the pre cut sheets like I used to use 20 years ago.

 

[USAFRet]

yes, but I was wondering if anyone has the pre cut sheets like I used to use 20 years ago.

Precut, for a specific board?

 

[dev_cyberpunk]

You can buy a box of several hundred standoffs, of varying sizes.
$15 and under.

https://www.amazon.com/Csdtylh-Male-Female-Standoff-Stainless-Assortment/dp/B06Y5TJXY1

https://www.amazon.com/Standoffs-Motherboard-Assortment-Threaded-Circuit/dp/B0CBPGKDP4

the ones in the rack mount case are permanently flat riveted into place.

 

[dev_cyberpunk]

Precut, for a specific board?

CEEEB or EATX I think they call it now days, They were precut for a 12x13 board, even though I have what we used to call them at SCI as extended flex ATX (9x12 sideways orientation from standard ATX) when we built them all many moons ago.

I wonder if any of the supermicro vendors have them since this case has the same standoffs like they use in their 1U and 2U cases. Even though I will have to pay a premium since its supermicro.

Here is a Supermicro case that comes with the fish paper, but I don't want to pay $700 just for that piece:

Since I need to buy an i/o shield for another build, I'll talk to someone at Supermico tomorrow about this.

I think theirs is a glass fibre type instead of vulcanised paper or poly and her sister ester type.

 

[dev_cyberpunk]

This stuff?

https://www.grainger.com/product/Gasket-Sheet-12-in-x-12-in-810L79?gQT=1

so you can reach that site?

 

[COLGeek]

so you can reach that site?

Yes.

 

[USAFRet]

so you can reach that site?

 

[dev_cyberpunk]

Yes.

I'll have to investigate why my intrusion prevention is blocking it then.

 

[COLGeek]

I'll have to investigate why my intrusion prevention is blocking it then.

Odd. Try via a private window.

 

[dev_cyberpunk]

Odd. Try via a private window.

Just when I thought I was done and over with Linux OS development.
So Suricata has issues with 6.12.13 init
All I have loaded in it is Abuse.ch SSLBL Blacklist Rules which is a revoked SSL list.
I turned it off temporarily to look at it. Yes that is similar to what I'm looking for.