M2N SLI Deluxe Beep codes? Uh...

[slitherjef]

For some reason I cannot find the beep codes in the manual for the M2N SLI deluxe motherboard. Could have just missed them, but I downloaded the PDF too and searched and came up empty as well so I thought I would ask you all.

The beep code (note, I did not have my speaker on when I powered up the PC, but the case speaker beep)

Beeeeeep....... beep beep beep

then nothing.
The monitor went back into standby, the reset switch did not work. Holding the power button down for a few secs turned off the PC. A few minutes later I fired it up and it loaded as normal

First time it happened, its a new build and been running pretty smooth so this beep code is new.

The specs:
AMD athlon x2 64 5200+
Kingston value ram 2 x 1gig sticks (667mhz) in dual channel
WD 320gig SATA drive
OCZ 700 gamerXstream PSU
EVGA geforce 8800 gts 640mb

If anyone can translate the beep code or tell me where to look in the manual, that would be great.

 

[chungdokwan]

I dont have this board so I could be wrong but I think that with an award BIOS that this code is a memory error, try taking out one stick and booting it then the other and see what happens

I expect to be wrong but at least it will give you something to do while you wait for someone else to answer.

 

[Guest]

I have the same problem, you can download the bleep codes and diagnostic faults, the fault you have is memory, or CPU, if not its the Motherboard. Take both RAM cards out and switch on, if it is still one long bleep and three short then is not the RAM cards
good luck