Manually formatting a hard drive.

Status
Not open for further replies.

Kevin Perez

Reputable
Mar 17, 2014
5
0
4,510
Please let me know what will happen if I follow these steps. First, remove the internal IDE hard drive from the computer. Then place a fist sized magnet against the removed drive. I am guessing all the files will be deleted. Unfortunately, this may lead to one of two potential side effects. One is that the drive will be totally useless, and may never be used again. Secondly, the drive will not be formatted.

Has anyone tried formatting a hard drive in this manner?
 
Solution
You won't erase the disk that way, merely corrupt the data on the drive, there will still be a large amount of recoverable data on that disk. If you want to erase all the data tell windows to format it but don't do a quick format, do a full format and it will blank the drive when it does it. If you want a secure delete there are programs out there that will format the drive and overwrite everything with garbage data and repeat to make sure you can't undo the formatting.
You won't erase the disk that way, merely corrupt the data on the drive, there will still be a large amount of recoverable data on that disk. If you want to erase all the data tell windows to format it but don't do a quick format, do a full format and it will blank the drive when it does it. If you want a secure delete there are programs out there that will format the drive and overwrite everything with garbage data and repeat to make sure you can't undo the formatting.
 
Solution


Thats because it has to be a very strong magnet. Either a large Neodymium type magnet or what I did and accidentally bring your portable drive (killed it) into an MRI at work it is very hard to do but possible.
 

Kevin Perez

Reputable
Mar 17, 2014
5
0
4,510


There are a number of reasons I would use a magnet and not Window's format function/feature. One is that the computers have files that absolutely need to be deleted. Another one is the computers are no longer setup. Thirdly, even if they were setup, formatting a hard drive can take hours. Granted hooking up the computers only takes a couple of minutes, so the second reason is more of an excuse.

In regards to the third reason, I have heard stories about even fully formatting a hard drive, does not make the old files permanently unrecoverable. Granted I have only heard stories, and the stories could be myths. Anyone here able to verify that after formatting a HD, the files can not possibly be accessed?
 


If you are that paranoid get one of those programs that write a bunch of data to the drive after they format it. Also any magnet that is strong enough to reliably remove all data from the HDD i strong enough to brick the drive.If that is your end goal a hammer will save you some time.
 
Status
Not open for further replies.