Maximus VIII code 62 and vga led white

[its_in_the_blood]

So I've been having issues with a new build (first build) I've got:
ASUS Maximus VIII Hero Alpha (already upgraded to gen 7 chip set by the seller novatech U.K.)
Intel i5-7500 CPU
Cooler Master HYPER 103 CPU cooler
Corsair vengeance LPX 16gb 3000mhz RAM
EVGA 750 GQ 80plus gold PSU
MSI GeForce GTX 1060 6gb GPU

So when I press start it doesn't show the Bios on screen and the q-code is 62 then jumps to 72 then back to 62 along with the VGA_LED light being on constantly white.
I've tried a hdmi cable in the motherboard and GPU along with a dvi cable in my GPU but it doesn't boot the bios and no beeps.
I've taken everything out apart from the cpu and cooler and 1 stick of ram, also tried taking out the cmos battery.
Can anyone help at all? Is it my motherboard that is broken?

 

[alexoiu]

Even if upgraded to gen7, I'd try though a BIOS Flashback.

 

[its_in_the_blood]

Will I need to have a old cpu to bios flashback (I don't have one that I can put in)

 

[Paul NZ]

Nope get the update. Extract it if it's zipped.

Change it to whatever name it says to it in manual. Follow what it says in the manual after that

Format a flash drive in FAT32

 

[alexoiu]

Will I need to have a old cpu to bios flashback (I don't have one that I can put in)

No, You won't even start the board. If not sure how to, post back.

 

[alexoiu]

Download the latest version from http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/MAXIMUS_VIII_HERO_ALPHA/MAXIMUS-VIII-HERO-ALPHA-ASUS-3504.zip?_ga=2.112595268.1774500154.1513101669-618874307.1512771548
Unzip and rename the file from MAXIMUS-VIII-HERO-ALPHA-ASUS-3504.CAP to M8HA.CAP
Save the renamed file on a FAT 32 formatted USB drive.
Connect the drive to the designated Flashback port (check the board's manual for its location).
Don't start the motherboard, just make sure that the power supply is connected and on.
Press the Flashback button for 3 secs.
Wait until the process ends (more than 10 secs).

 

[its_in_the_blood]

Okay thank you I will try this when I can get a chance

 

[alexoiu]

No problem.

 

[its_in_the_blood]

Download the latest version from http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/MAXIMUS_VIII_HERO_ALPHA/MAXIMUS-VIII-HERO-ALPHA-ASUS-3504.zip?_ga=2.112595268.1774500154.1513101669-618874307.1512771548
Unzip and rename the file from MAXIMUS-VIII-HERO-ALPHA-ASUS-3504.CAP to M8HA.CAP
Save the renamed file on a FAT 32 formatted USB drive.
Connect the drive to the designated Flashback port (check the board's manual for its location).
Don't start the motherboard, just make sure that the power supply is connected and on.
Press the Flashback button for 3 secs.
Wait until the process ends (more than 10 secs).

Should the bios button stat on constantly when it's done or do u have to wait for it to turn off(blue)

 

[alexoiu]

Wait to turn off.

 

[its_in_the_blood]

Wait to turn off.

How long can this take as it's been on a constant blue for over 30min now?

 

[alexoiu]

Then something went wrong. Did it flash?
Try restarting it and see what code getting.

 

[its_in_the_blood]

Then something went wrong. Did it flash?
Try restarting it and see what code getting.

I've still got the same code issues, should I retry the flash then?

 

[alexoiu]

Yes, make sure that you're following all steps above.

 

[its_in_the_blood]

It's alive!
Thank you so much for all your help!
I tried to call novatech.co.uk tech support and they just asked me to send it to them for more money.
Now I know to always come here first

 

[alexoiu]

You're welcome. Glad it helped.