Question Memory clock is stuck at 6000MHz

Sebastian_19

Reputable
May 24, 2016
22
0
4,520
1
I have recently purchased an GIGABYTE WINDFORCE GTX 1650 Super GPU, and when I open MSI Afterburner, the memory clock is ALWAYS stuck at 6000 MHz, no matter if im gaming or not. Is this normal?



 

Sebastian_19

Reputable
May 24, 2016
22
0
4,520
1
Is the refresh rate more than 60Hz?
if so, try
https://www.nvidia.com/content/Control-Panel-Help/vLatest/en-us/mergedProjects/nvdsp/Apply_Coordinated_Video_Timing_Reduced_Blanking_HDTV.htm

Are you using display port? try hdmi

Use DDU uninstaller and reinstall nvidia.com drivers

reset and uninstall afterburner and other tuning software

any browser or software running while you check the memory clock?
Nothing is running, using hdmi, refresh rate is 60, tried reinstalling drivers and same thing.
 
Dec 16, 2020
1
1
15
0
Hello, i had a similar situation with my Gigabyte GTX 1650 D6 Windforce.

At idle the Graphics, Memory and Video clock was at Higher frequency.

Since there's the Zero fan mode. The video card was aways at 50 °C and sometimes the fans just burst to full rpm for a second. That got my atention.

So i changed the 3D Configurations for energy management mode from maximum performance to optimal energy. This corrected the frequencies and lowered the VGA temperature in idle to 36-38 ° C

HWMonitor info

3D Configuration
 
Reactions: Nemesia

ASK THE COMMUNITY

TRENDING THREADS