memory management error

[gabgosselin65]

hey guys so i just build my new pc. i keep having the same error since that. Memory management error. I ran the windows memory diagnostic no problem found. I don't know what to do now. I get this error after like 3-4hours of usage. So i guess we can remove the PSU is not the problem since i dont get the error after i boot the pc ? I can be right too

Corsair vengance 2x8gb
i7 7700k
Asus prime z270-a
Asus gtx 1070 8gb
EVGA 550W PSU ( Same PSU that i used on my old pc )
SSD Samsung 850 EVO 500gb ( my Windows 10 is installed on this )
HDD 1to seagate barracuda (already had this HHD on old pc )
Corsair h100i v2

My CPU temps run around 30c-40c idle and 60c-70c while gaming
My GPU temps run around 40c idle and 60-70c while gaming

 

[gabgosselin65]

UPDATE : so i removed my SSD , install windows on the HDD let it run for the night got no problem. But now i got the SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M system error i ran whocrashed.

On Sun 2017-12-03 07:25:39 your computer crashed
crash dump file: C:\Windows\Minidump\120317-11031-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x4BDAA2)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80360345AA2, 0xFFFFC4004FDE37B8, 0xFFFFC4004FDE2FF0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 2017-12-03 07:25:39 your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80360345AA2, 0xFFFFC4004FDE37B8, 0xFFFFC4004FDE2FF0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug check description: This bug check indicates that a system thread generated an exception that the error handler did not catch.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

what this mean ?