[SOLVED] Memory overclocking fail

[masadek]

I recently assembled a new PC.
When I enabled the XMP profile (3600mhz), I can' boot and get error: Memory overclocking fail
and I have to press F1 to disable the XMP and boot normally with RAM speed: 2133mhz. Is there any way I can enable xmp to have 3600mhz speed

I tried both BIOS: 7C73v13 , and 7C73v17 (Both game same error).

My system:

RAM: CORSAIR VENGEANCE RGB PRO 16GB (2 x 8GB) DDR4 DRAM 3600MHz C18
https://www.corsair.com/ww/en/Categ.../Vengeance-PRO-RGB-Black/p/CMW16GX4M2C3600C18

CPU: i7 10700k

MotherBoard: MSI MPG z490 Gaming Carbon wifi

PSU: 750 watt +80 Gold

 

[COLGeek]

Try a slightly lower speed XMP profile (like 3200). Not all memory will work at rated speeds in all motherboards.

 

[Zerk2012]

I recently assembled a new PC.
When I enabled the XMP profile (3600mhz), I can' boot and get error: Memory overclocking fail
and I have to press F1 to disable the XMP and boot normally with RAM speed: 2133mhz. Is there any way I can enable xmp to have 3600mhz speed

I tried both BIOS: 7C73v13 , and 7C73v17 (Both game same error).

My system:

RAM: CORSAIR VENGEANCE RGB PRO 16GB (2 x 8GB) DDR4 DRAM 3600MHz C18
https://www.corsair.com/ww/en/Categ.../Vengeance-PRO-RGB-Black/p/CMW16GX4M2C3600C18

CPU: i7 10700k

MotherBoard: MSI MPG z490 Gaming Carbon wifi

PSU: 750 watt +80 Gold

Try it setting the speed to 3200 OR set it to 3600 and increase the voltage from 1.35 to 1.4

 

[masadek]

Try it setting the speed to 3200 OR set it to 3600 and increase the voltage from 1.35 to 1.4

I tried 3200 at DRAM Voltage 1.35 and still same error, do I need to change anything else?

 

[Zerk2012]

I tried 3200 at DRAM Voltage 1.35 and still same error, do I need to change anything else?

Try 3200 with 1.4