[SOLVED] Memory seems fixed at 2133 Mhz

[rhan101277]

I have a OMEN 25L GT12-0060 desktop. I recently realized after running a benchmark that my memory so running at DDR4 2133Mhz. My CPU can support memory speeds of 2933, my chipset Intel H470 supports 2933. I’ve tried to raise the speed to 2933 in bios but it failed and gives me the three long beeps and two short beeps. That’s a memory issue and it clears when I go back to lower speeds. My BIOS has XMP options but for whatever reason they aren’t filled in and I have to fill them in. I would like my memory to run at the speed my CPU and chipset are capable of doing. Is there something I am doing wrong? Thanks in advance.

 

[SkyNetRising]

My BIOS has XMP options but for whatever reason they aren’t filled in and I have to fill them in.

Show screenshots from CPU-Z - cpu, motherboard, memory and spd sections and
screenshots from BIOS XMP options.
(upload to imgur.com and post link)

 

[rhan101277]

Show screenshots from CPU-Z - cpu, motherboard, memory and spd sections and
screenshots from BIOS XMP options.
(upload to imgur.com and post link)

https://imgur.com/EZ7CbUf

View: https://imgur.com/EZ7CbUf

 

[rhan101277]

Show screenshots from CPU-Z - cpu, motherboard, memory and spd sections and
screenshots from BIOS XMP options.
(upload to imgur.com and post link)

https://imgur.com/SiMTjgx

View: https://imgur.com/SiMTjgx

https://imgur.com/SiMTjgx

https://imgur.com/LerDvnS

View: https://imgur.com/LerDvnS

https://imgur.com/O77J8BE

View: https://imgur.com/O77J8BE

View: https://imgur.com/SiMTjgx

 

[sizzling]

Just because the cpu and motherboard support higher speeds does not mean the RAM can. Seeing as there are no XMP options I’d guess it’s only rated for 2133MHz

 

[SkyNetRising]

Set Memory overclocking values to:

Dram Frequency 1466 (2933/2)​

CAS Latency 16​

RAS to CAS Delay 18​

Row Active Time 36​

Memory Voltage 1.35V​

Leave remaining values on default.

 

[rhan101277]

Set Memory overclocking values to:

Dram Frequency 1466 (2933/2)​

CAS Latency 16​

RAS to CAS Delay 18​

Row Active Time 36​

Memory Voltage 1.35V​

Leave remaining values on default.

Thanks, I'll give this a shot and report back. I forgot to mention that the memory is DDR4 3200 but you probably figured that out already from my cpuz screenshot.

It worked, I didn't have an option for 1466, the closest was 1333. That still 500mhz faster that it was. I'm not sure why it just didn't automatically go to the closest clock frequency. It worked though and I appreciate it.