[SOLVED] Memory speed doesn't show up in Task Manager ?

[Jacob 51]

My RAM speed doesn't show up in task manager. The area below "Hardware reserved" is empty. If I use the code "wmic memorychip get speed" in CMD, the output comes "speed" with the bottom empty.
I got 2 RAM sticks. One is HyperX Fury 8GB DDR3 1600Mhz. the other one is a Hynix 4 GB DDR3 1600Mhz.

In the BIOS, the speed of the RAM sticks is 1600Mhz, even though I didn't turn on the XMP. It is set to "default". I built this PC so I did not change anything in the BIOS

My specs:
Zebronics H61
Core i3 3240
12 GB DDR3 1600Mhz

 

[rgd1101]

use cpuz.
don't use task manager

 

[CountMike]

My RAM speed doesn't show up in task manager. The area below "Hardware reserved" is empty. If I use the code "wmic memorychip get speed" in CMD, the output comes "speed" with the bottom empty.
I got 2 RAM sticks. One is HyperX Fury 8GB DDR3 1600Mhz. the other one is a Hynix 4 GB DDR3 1600Mhz.

In the BIOS, the speed of the RAM sticks is 1600Mhz, even though I didn't turn on the XMP. It is set to "default". I built this PC so I did not change anything in the BIOS

My specs:
Zebronics H61
Core i3 3240
12 GB DDR3 1600Mhz

A lot of DDR3 doesn't have XMP at all, look it up in CPU-Z. JEDEC should show from 1066 - 1600MHz.

 

[Jacob 51]

A lot of DDR3 doesn't have XMP at all, look it up in CPU-Z. JEDEC should show from 1066 - 1600MHz.

Yes it shows 800mhz on the two which is total 1600mhz

 

[CountMike]

Yes it shows 800mhz on the two which is total 1600mhz

So it's all as it should be but it's not because there are 2 of them.