Question Monitor doesn't display anything. When PC is turned on, fan turns on for about 3 seconds then it turns off ?

Aug 20, 2024
11
0
10
Monitor doesn't display anything. When the PC is turned on, fan turns on for about 3 seconds then it turns off. Fan keeps doing that until the PC is turned off.

This started happening after I changed the processor to a new one and then put the previous one. Before I put the new one, and after I did, everything functioned properly. It was when I put back the previous one when the problem started. Now it won't boot with either processors.

I disconnected everything but the power supply, the motherboard, the processor, 1 stick of ram and the cpu fan and the problem still persisted.

I noticed the pins in the processor's socket to be bent. Could it be I accidentally damaged this piece and this is why it doesn't boot?
 
Pc doesnt display anything. When pc is turned on, fan turns on for about 3 seconds then it turns off. Fan keeps doing that until pc is turned off.
This started happening after I changed the processor to a new one and then put the previous one. Before I put the new one, and after I did, everything functioned properly. It was when I put back the previous one when the problem started. Now it won't boot with either processors.
I disconnected everything but the power supply, the motherboard, the processor, 1 stick of ram and the cpu fan and the problem still persisted.

I noticed the pins in the processor's socket to be bent. Could it be I accidentally damaged this piece and this is why it doesn't boot?


529336189_2210751606037110_5832779268353556276_n.jpg
Yes. Definitely.
 
  • Like
Reactions: jhuju
Hi, this is most unfortunate, but perhaps a repair shop can fix the bent socket pins for a price. Otherwise if it too damaged you will have to buy another motherboard. Just before removing and replacing the CPU it is CRITICAL to NOTE which corner on the socket the arrow on the CPU is located BEFORE you remove it from the socket. Correct orientation is critically important with the installation of the CPU into the socket on any motherboard. When done correctly the CPU will drop into place. Just information for future use.
 
  • Like
Reactions: jhuju
Alright, so I acquired another motherboard, but when I press the power button, nothing happens. The CPU does not heat up, the fan doesn't spin even a little, there are no beeps, nothing happens. The only reaction I get is when I plug in the motherboard, a led that reads "R94 5VSB_LED1" lightens up in amber yellow color. I think the motherboard I acquired is dead. What do you think?