Basically I tried turning my computer on and everything works, there's power in the peripherals. LED's in the GPU and all that but the monitor has no signal and stayed in black screen. I tried removing the HDMI and plugging it back in but it still says "HDMI has no signal". I have done a lot of research before asking here but unfortunately no luck.
Things I've tried:
- Removing all the screws all the way to the motherboard stands and plugging everything back in.
- Removing the CMOS Battery for a few minutes and putting in back in.
- Removing the RAM and inserting it on the other slot.
- Tried both the HDMI slots on the GPU as well as on the monitor.
By the way, it did boot up when I plugged it in the On Board Graphics and I got into the BIOS.
I already changed the settings where the PC will utilize the GPU instead of the On Board.
I also disabled the On Board's driver and everything.
Another note is while the PC turns on the LED DEBUG on VGA lits up for a few seconds in the motherboard.
Currently the PC is on and is connected on the On Board Graphics while the GPU is still plugged in and also seems to be on due to the LED on it being lit.
What I think is either the GPU or the PCIE slot is broken, I will probably try the video card in my friend's computer but I won't be able to do it today so I will have to ask you guys first and maybe you can help me fix it before then.
My PC Build:
CPU - i5 6400
GPU - Sapphire Nitro RX 470
MOBO - MSI H110M PRO-VH
RAM - Crucial Ballistix 1x8gb
PSU - Corsair VS550
Monitor - BenQ RL2455hm
TL;DR - PC turns on but the HDMI has no signal which causes the monitor to stay black.
Note: I know that this problem is very common but none of the suggestions seems to work.
Things I've tried:
- Removing all the screws all the way to the motherboard stands and plugging everything back in.
- Removing the CMOS Battery for a few minutes and putting in back in.
- Removing the RAM and inserting it on the other slot.
- Tried both the HDMI slots on the GPU as well as on the monitor.
By the way, it did boot up when I plugged it in the On Board Graphics and I got into the BIOS.
I already changed the settings where the PC will utilize the GPU instead of the On Board.
I also disabled the On Board's driver and everything.
Another note is while the PC turns on the LED DEBUG on VGA lits up for a few seconds in the motherboard.
Currently the PC is on and is connected on the On Board Graphics while the GPU is still plugged in and also seems to be on due to the LED on it being lit.
What I think is either the GPU or the PCIE slot is broken, I will probably try the video card in my friend's computer but I won't be able to do it today so I will have to ask you guys first and maybe you can help me fix it before then.
My PC Build:
CPU - i5 6400
GPU - Sapphire Nitro RX 470
MOBO - MSI H110M PRO-VH
RAM - Crucial Ballistix 1x8gb
PSU - Corsair VS550
Monitor - BenQ RL2455hm
TL;DR - PC turns on but the HDMI has no signal which causes the monitor to stay black.
Note: I know that this problem is very common but none of the suggestions seems to work.