[SOLVED] Monitor not turning on (Power saving mode)

[Ysertila]

I just built my new pc last night and I plugged 2 hdmi cords to it. One to the mother board and one to the gpu, both go into my monitors hdmi ports. But when I click the power button it shows this image about 5 seconds after:

The actual pc seems to be working fine though, all fans are moving including the gpu fans, some lights on the mobo, and the case power light.

I removed the memory and put it back in and made sure all the cords are plugged in properly, still power save mode. am I doing something wrong? I’m fairly new at this.

I looked at other people’s posts with similar problems but found no answer.

Here are my specs:

• AMD Ryzen 5 2600 3.4 GHz 6-Core Processor
• MSI B450M BAZOOKA V2 Micro ATX AM4 Motherboard
• Western Digital Caviar Blue 1 TB 3.5" 7200RPM Internal Hard Drive
• Samsung 860 Evo 500 GB 2.5" Solid State Drive
• Gigabyte GeForce GTX 1660 Ti 6 GB OC Video Card
• Cougar MX330 ATX Mid Tower Case
• Corsair CXM 650 W 80+ Bronze Certified Semi-modular ATX Power Supply

More pictures below

Sent from my iPhone using Tapatalk

 

[Wolfshadw]

Disconnect the HDMI cable from the motherboard and display. You only need one connection from the graphics card.

-Wolf sends

Motherboard Manual - Ref pg 39-40

 

[Ysertila]

Disconnect the HDMI cable from the motherboard and display. You only need one connection from the graphics card.

-Wolf sends

Motherboard Manual - Ref pg 39-40

Thank you, it worked.


Sent from my iPhone using Tapatalk